Close
Kyoritsu 5406A – Digital RCD Tester
- Custom microprocessor controlled for highest accuracy and reliability.
- 3 LEDs for checking correct wiring status.
- 0 and 180 degree phase angle switch permits quick tests and consistent readings.
- Digital read-out of tripping time.
- Constant current source circuitry ensures that a fluctuating mains voltage does not affect the accuracy of readings.
- Large custom digital display readout.
- Visual indication of reversed phase and neutral wiring at socket.
- Designed to IP54 Rating.
- Complies with IEC 61557
- Test of a large kind of RCD’s: Standard, Selective, AC and A (DC sensitive
Close
Kyoritsu 5711 Voltage Detector, 50/60Hz
Features:
- Senses AC voltage through insulation
- Buzzer sounds and tip glows upon ac voltage detection
- Powerful flashlight
- Dual range (Hi/ Lo) sensitivity
- Ready to use without power-on
Designed to meet IEC61010-1
Close
Kyoritsu 6010B Multifunction Electrical Tester
Features
- Continuity 20/200 Ω 200 mA Test Current
- Insulation 500/1000 V, 20/200 MΩ 1 mA Rated Test Current
- Loop Impedance 20/2000 Ω 15mA Test Current at 2000 Ω (No RCD Trip)
- RCD 10/30/100/300/500mA x1/2, x1, Fast Trip (40 ms), DC, Auto Ramp
- Uc (Contact Voltage) 100 V
- Designed to IEC 61010-1, IEC 61557
- Data Memory: 300 measured results
- Download Results to PC by Using 8212 Data Communication Adapter through Optical RS-232C Port
Kyoritsu 6205 – Portable Appliance Tester Battery Operated
Protect life and property from faulty appliances
・Battery operated
・PASS / FAIL result
・Color status back light
・10 mA & 30 mA RCD test(Isolation transformer built in)
Memory function up to 999 data
・Printer output
・Complies to AS / NZS 3760
Close
Kyoritsu 6315-04 Power Quality Analyzer
Features
- Helpful support functions: Quick start guide, wiring check and sensor detection for easy and reliable measurement
- Measurement with high accuracy: Guaranteed accuracy: ±0.3%rdg (energy), ±0.2%rdg (voltage/ current); Complies with the international standard IEC 61000-4-30 class S and the european standard EN50160
- Remote monitoring on PC and Android device: Remote checking of measurement in real-time is possible via Bluetooth communication; Recorded data can be saved in the supplied SD card; EN50160 report can be generated after survey by PC software
- Various clamp current sensors: Various types of clamp and flexible sensors are available from 1000 mA range up to 3000 A range and earth leakage measurements; Energy consumption check on site, trend and demand graphs for easy recognition, TFT color display with high resolution
- IEC 61010-1 CAT IV 300 V, CAT III 600 V, CAT II 1000 V
Close
Kyoritsu 8035 Non-Contact Safety Phase Indicator, 70 to 1000 V AC
Features
- Innovative technology permits safe, contact-free testing
- The insulated crocodile clips can clip insulated cables from Ø0.09 to 1.18″ (2.4 to 30 mm)
- Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones
- Can be fixed to a metal panel via the magnet on the back side
- Wide measuring range for three-phase installations from 70 to 1000 V AC
- Complies with IEC 61010-1 CAT 600 V and CAT 1000 V
Close
Kyoritsu KEW2117R AC Digital Clamp Meter, True RMS, 1kHz
Features
- Frequency response: 40Hz to 1kHz
- Full Safety Jaw
- Ergonomic over-molded body gives convenient one-handed operation
- Large easy-to-read display with 0.1 A resolution
- Accurate reading with True RMS 600/1000A auto-ranging
- Long battery life
- Safety Standard: IEC61010-1 CAT IV 300V / CAT III 600V
Close
Kyoritsu KEW6516BT Multi-Function Tester with Bluetooth
Features
- Color LCD 3.5″ dot matrix
- Anti-trip technology (with 2 and 3 wire) for no trip LOOP L-PE testing on all RCDs
- With 2 wires only, very useful in case of no neutral (i.e. three-phase motor lines)
- High test current range of 2 Ω with 0.001 Ω resolution
- Zs Limit compares the values required by electrical installations standard with measured results
- Type AC, A, F, B (General and Selective), EV and Variable RCDs
- Single and auto test, ramp test and contact voltage
- Earth resistance test 2 and 3 wires with all accessories included
Close
LEAD-ABN-100 – Fluke Networks Test Lead with Angled Bed-of-Nails Clips
Fluke Networks LEAD-ABN-100 Test Lead with Angled Bed of Nails for the TS100 Pro
- Braided cables for durability and insulating boots over clips for safety
- Incorporated strain relief for durability
- Field replaceable
- BNC to ABN
Close
LEAD-ABN-PPIN – Fluke Networks Test Leads Angled Bed-of-Nails Clips
Fluke Networks LEAD-ABN-PPIN Test Lead ABN with Piercing Pin Clips, for the TS54, 53, 23
- Braided cables for durability and insulating boots over clips for safety
- Field replaceable
Close
LEAD-ABNP-100 – Fluke Networks Test Lead with Angled Bed-of-Nails Clips and Piercing Pin Clips
Fluke Networks LEAD-ABNP-100 Test Lead ABN with Piercing Pin for the TS100, TS100 Pro
- Braided cables for durability and insulating boots over clips for safety
- Incorporated strain relief for durability
- Field replaceable
- BNC to ABN with PP
Close
LEAD-ABNPRJ11 – Fluke Networks Test Leads with Angled Bed-of-Nails Clips Piercing
Fluke Networks LEAD-ABNPRJ11 Test Lead ABN with Piercing Pin Clips and RJ11, for the TS54, 53, 23
- Braided cables for durability and insulating boots over clips for safety
- Field replaceable
