Showing 241–252 of 2494 results

Show sidebar
Close

Fluke 1587 FC Insulation Multimeter

$1,625.00
Excluding GST 10%
  • Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
  • Includes live circuit detection to prevent insulation test if voltage >30 V is detected
  • Provides automated temperature compensation to establish accurate baselines
  • Supports historical tracking and asset trending of assets to identify degradation over time with Fluke Connect® Assets (sold separately)
  • Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
  • Includes auto-discharge of capacitive voltage for added user protection
  • Measures ac/dc voltage, dc millivolts, ac/dc milliamps, resistance, and continuity
  • Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading
  • Automatically powers off to save battery power
  • Comes with remote probe, test leads, alligator clips, K-type thermocouple, hard case, and three-year warranty.
Close

Fluke 1587 T Insulation Multimeter

$1,922.00
Excluding GST 10%

Fluke 1587 T Offers

Features

  • Large display with backlight
  • Insulation test: 0.01 Mohm to 2 Gohm
  • Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
  • Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
  • Auto-discharge of capacitive voltage for added user protection
  • AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (ohm), Continuity
  • Filter for motor drive measurements
  • Capacitance, diode test, temperature, Min/Max, frequency (Hz)
  • Auto power off to save battery power
  • CAT III 1000 V, CAT IV 600 V measurement category
  • Accepts optional Fluke TPAK™ magnetic hanging system to free your hands for other work
  • Rugged, utility hard case allows you to bring everything you need for the job
  • Three year warranty
Close

Fluke 1587/MDT FC Advanced Motor & Drive Troubleshooting Kit

$2,668.00
Excluding GST 10%

Features

  • Fluke 1587 FC
    • Insulation Test Voltages: 50V, 100V, 250V, 500V, 1000V
    • Insulation Test: 0.01 MΩ to 2.0GΩ
    • AC/DC voltage
    • DC millivolts
    • Insulation test smoothing reading
    • Frequency measurement
    • Capacitance measurement
    • Diode test
    • Temperature measurement
    • CAT III 1000V, CAT IV 600V measurement category
  • Fluke i400 Clamp Meter
    • Measures up to 400A AC
    • 1 – 400A continuous current range
    • 2% + 0.06A basic accuracy
    • 1mA / amp output
    • CAT IV 600V / CAT III 1000V Safety rating
    • Max. conductor 32mm diameter
  • Fluke 9040 Phase Rotation Indicator
    • 3 phase indication
    • Indication of phase rotation
    • 40-700 V voltage range
    • 15-400 Hz frequency range
    • Clear LCD display
    • Continuous operating timer
    • IP40 dust/water resistance
    • CAT III 600 V overvoltage rating
    • No battery required
Placeholder
Close

Fluke 1587FC Insulation Multimeter

$1,980.00
Excluding GST 10%

Fluke 1587 FC Offers

  • PI/DAR timed ratio tests (1587 FC only)
  • Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
  • VFD low-pass filter for accurate motor drive measurements (1587 FC only)
  • Auto-discharge of capacitive voltage for added user protection
  • Insulation test (1587 FC: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to 600 MΩ)
  • Insulation test voltages (1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V),(1577: 500 V, 1000 V) for many applications
  • AC/DC voltage, DC millivolts, AC/DC milliamps, Resistance (Ω), Continuity
  • Capacitance, diode test, temperature, Min/Max, frequency (Hz)(1587 FC only)
  • Auto power off to save battery power
  • CAT III 1000 V, CAT IV 600 V measurement category
  • Rugged, utility hard case allows you to bring everything you need for the job
  • Large display with backlight
Close

Fluke 1594A, 1595A Super-Thermometers

  • Calibrate SPRTs, PRTs, RTDs and thermistors (0 Ω to 500 k Ω)
  • Accuracy as good as 0.06 ppm (0.000015 °C)
  • “Ratio Self-Calibration” verifies and calibrates resistance ratio accuracy
  • Automatic zero-power measurements calculate thermometer probe self-heating
  • Temperature-controlled internal reference resistors
  • Calibrated sensing current lowers overall instrument uncertainty
  • Four input channels on the front panel accept sensors under test or external references
  • Two dedicated external reference input channels on the rear panel
  • Standby current reduces transient effects when scanning between channels
  • Channel Select keys turn measurement mode on or off at the touch of a button
  • Sample rates as fast as one second
  • USB data transfer and computer control
  • Remote view and device control via Ethernet
  • Compatible with MET/TEMP II automated calibration software and LogWare II multichannel, real-time data acquisition software
Close

Fluke 1620A Digital Thermometer-Hygrometer

  • Superior accuracy
  • Network enabled
  • Powerful logging and analysis tools
  • Two interchangeable calibrated sensors
  • Huge memory
  • Upgraded software
Close

Fluke 1623-2 Earth Ground Resistance Meter

$3,631.00
Excluding GST 10%
  • Adjustable stroke length can be set to limit the pressure per stroke
  • 1/4 in NPT male to 1/4 in BSP female
  • 1 meter of hose
  • (2) 1/8 in NPT male quick connects
  • 1/8 NPT female to 1/4 in BSP female
  • Seal Kit
  • Instruction sheet
Close

Fluke 1623-2-KIT Basic Geo Earth Ground Tester Kit

$5,223.00
Excluding GST 10%

Features

  • One-button measurement concept
  • 3- and 4-pole earth ground measurement
  • 4-pole soil resistivity testing
  • Selective testing, no disconnection of ground conductor (one clamp)
  • Stakeless testing, quick ground loop testing (two clamps)
  • Measuring frequency 128 Hz
Close

Fluke 1625-2 GEO Earth Ground Tester

$7,259.00
Excluding GST 10%
  • Provides R* measurement that calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
  • Includes USB port for data storage and transfer
  • Features IP56 rating for outdoor use
  • Offers adjustable limits for quicker testing
  • Comes with a rugged carrying case
Close

Fluke 1625-2-KIT Advanced Geo Earth Ground Tester Kit

$8,492.00
Excluding GST 10%

Features

  • One-button measurement concept
  • 3- and 4-pole earth ground measurement
  • 4-pole soil resistivity testing
  • Selective testing, no disconnection of ground conductor (1 clamp)
  • Stakeless testing, quick ground loop testing (2 clamps)
  • Measuring frequency 128 Hz
Close

Fluke 1630-2 FC Earth Ground Clamp

$3,318.00
Excluding GST 10%
  • AC leakage current measurement – identify ac leakage currents without disconnecting the earth ground stake from the grounding system – ideal for system troubleshooting
  • Rugged – heavy-duty clamp jaw stays in alignment and in calibration even in every day, on the job industrial environments
  • Logging measurements – the earth ground clamp saves time by automatically recording data at pre-set intervals and saves up to 32,760 measurements in memory at the set logging interval
  • Alarm threshold – user-defined high/low alarm limits, for rapid measurement evaluation
  • Band-pass filter – selectable band-pass filter function removes unwanted noise from the ac leakage current measurement
  • Fluke Connect compatible
Close

Fluke 1662 – Multifunction Electrical Tester

$2,167.00
Excluding GST 10%

A solid, reliable, basic installation tester

  • Tests voltage and frequency
  • Checks wiring polarity to detect broken N wires
  • Measures insulation resistance and loop and line resistance
  • Measures motor windings with continuity test
  • Calculates prospective earth fault current (PEFC/IK) and prospective short-circuit current (PSC/IK)