Close
Fluke 80i-110s AC/DC Current Clamp
Features
- 10 or 100A AC/DC nominal current range
- Continuous current range
- 0.1 to 10A AC/DC (100mV/A output)
- 1 to 100A AC/DC (10mV/A output)
- ±3% of reading +50mA (100mV/A, 50mA to 10A)
- ±4% of reading +50mA (10mV/A, 50mA to 40A)
- ±12% of reading +50mA (40 to 80A)
- ±15% of reading (80 to 100A)
- Maximum non-destructive current of 140A (2kHz)
- Lowest measurable current of 0.1A
- 100kHz useable frequency
- CAT II 600V & CAT III 300V
- 1-year warranty
Close
Fluke 80i-2010s AC/DC Current Clamp, 2000 A
An open-jaw, clamp-on current probe with a current range of 2000 A, and an accuracy of 0.8%, that is also
Close
Fluke 80i-2010s/3PK AC/DC Current Clamp, 2000 A, 3-pack
An open-jaw, clamp-on current probe with a current range of 2000 A, and an accuracy of 0.8%, that is also
Close
Fluke 80K-15 High Voltage Probe
Product Features:
- Voltage range: 1kV to 15kV DC or peak AC, 10kVrms AC
- Input resistance: 1000 Megohm
- Division ratio: 1000:1
- Safety rating(s): IEC 1010-2-031:1993, Type B, 10kV DC or peak AC, 10kVrms AC, Overvoltage Category I (voltages derived from limited energy transformer)
- Required meter input resistance: 10 Megohm
Close
Fluke 80K-40 High Voltage Probe
Product Features:
- Voltage range: 1kV to 40kV DC or peak AC, 28kVrms AC
- Input resistance: 1000 Megohm
- Division ratio: 1000:1
- Safety rating(s): IEC 1010-2-031:1993, Type B, 40kV DC or peak AC, 28kVrms AC, Overvoltage Category I (voltages derived from limited energy transformer)
- Required meter input resistance: 10 Megohm
Close
Fluke 80K-6 KV High Voltage Probe
Product Features:
- Voltage range: 0 to 6kV DC, or peak AC
- Input resistance: 75 Megohm nominal
- Division ratio: 1000:1
- Safety rating(s): CAN/CSA C22.2 No. 1010.2.031-94 and IEC 1010-2-031:1993, Type B, 6kV DC or peak AC, 4.24kVrms AC, Overvoltage CAT I (Voltage derived from limited energy transformers)
- Required meter input resistance: 10 Megohm
Close
Fluke 80PJ-1 Type J Bead Probe
Fluke 80PJ-1 Offers
- This basic, inexpensive thermocouple offers good accuracy and fast response. (Not suitable for liquid immersion.)
- Type-J thermocouple for general purpose applications
- Measurement range: -40 to 260°C
Close
Fluke 80PJ-9 General Purpose Probe
Fluke 80PJ-9 Offers
- J-type probe for use on surfaces and for insertion into air and non-caustic gases.
- Probe constructed with 304 stainless steel is compatible with J-type thermometers.
- Measurement range:-40°C to 260 °C
Fluke 80PJ-9 Specifications
Measurement Range F ( C ) -40 to 500F (-40 to 260C)
Accuracy (degree + or -) 1.1C at 0 to 260C
Probe Tip O.D. inches (mm) 0.375 (9.5)
Probe Tip Length inches (mm) 5.5 (140)
Cable Length inches (meters) 40 (1)
Manufacturer’s Warranty 1-year
Close
Fluke 80PJ-EXT Extension Wire Kit
- Extending and repairing J-type thermocouple wires
- Kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors
- Maximum continuous exposure temperature: 260°C
- 80PJ-EXT is designed for J-type thermometers
- One year warranty
Close
Fluke 80PK-1 Beaded K-Type Probe
Product Features:
- Type-K thermocouple
- For General purpose applications
- Measurement range: -40 to 260 °C (40 to 500 °F)
- One year warranty
Close
Fluke 80PK-10 Pipe Clamp Temperature Probe
- Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces
- For pipe diameters: 32 mm to 64 mm (1.25 in to 2.5 in)
- Measurement range: -29 °C to149 °C (-20 °F to 300 °F)
- Measurements are repeatable to 0.56 °C (1 °F)
- Durable ribbon sensor
- 1 m (39 in) lead
- One year warranty
Close
Fluke 80PK-11 Type-K Thermocouple
Product Features:
- Type-K thermocouple
- Designed for hands free measurement of HVAC temperature measuring applications
- Use multiple and leave in place for route based routine maintenance
- Use with any temperature-measuring instrument designed to accept Type-K thermocouples
- Measurement range: -30 to 150 °C (-22 to 302 °F)
- Accuracy: ±1.5 °C (±2.7 °F)
- Measurement time (time constant): 10 seconds
- Maximum voltage: 24 V AC rms or 60 V DC maximum for proper safe operation
- Maximum temperature: 150 °C (302 °F)
- Cable:
- Total length: 1 m (40 in), 0.97 m (38 in) lead wire, 49.5 cm (19.5 in) fabric hook-and-loop fastener cuff
- Insulation material: Hytrel
- Width of attachment material: 2.5 cm (1 in)
- Min usable pipe diameter: 3.8 cm (1.5 in)
- Max. usable pipe diameter: 14 cm (5.5 in)
- Connector:
- Type: Yellow mini-thermocouple with 0.500 in pin
- Material: Hytrel 4774
- Maximum temperature: 200 °C (392 °F)
- One year warranty
prev
next