Close
Fluke 830/MAGNET Mounting Set
Compact magnetic sensor and prism mounting bracket set.
Close
Fluke 830/SHIMS Alignment Set
Precision alignment shim kit that corrects vertical misalignment.
Close
Fluke 835 Laser Belt Alignment Tool with reflector
Features
- Tailor-made for pulley alignment jobs because it is easy to use and only requires a single operator
- The strong magnets on the two units mount onto virtually any pulley face, making it the ideal partner for most pulley alignment jobs
- It leverages the proven OPTALIGN® reflected beam principle for maximum angular resolution to generate accurate and reliable readings
- Its time-saving method requires no cross-checking and shows offset, vertical, and horizontal angle simultaneously
- With four AAA batteries, the 835 provides 6 hours of continuous use
- Corrections are quickly made live; genuine alignment is achieved when the transmitted laser line and the corresponding reflected laser line harmonize with the respective reference line
Close
Fluke 83V Average Responding Industrial Multimeter
- Large digit display with bright, two-level backlight
- Resistance, continuity and diode test
- Min/Max-Average recording with Min/Max Alert to capture variations automatically
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bar graph for fast changing or unstable signals
- Input alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- “Classic” design with new removable holster with built in test lead and probe storage
Close
Fluke 8558A 8.5 Digit Multimeter
- Voltage sensitivity to hundreds of nV and current sensitivity to hundreds of pA allows you uncover ultra-low level transient signals
- Up to 20 MHz bandwidth for voltage and 4 MHz for current retains high bandwidth content of the signal measured
- 18-bit SAR analog-to-digital converter that achieves 5 mega-samples per second
- 5 mega-samples per second sample rate, into buffer, for capturing complex, fast changing waveforms
- 15 million readings memory allows large amount of data storage eliminating the
- immediate need to transfer data to a PC
- Graphical waveform display enables real-time visualization of complex waveforms, increased productivity with faster access to results and answers
Close
Fluke 8588A Reference Multimeter
- 2.7 µV/V (95%), 3.5 µV/V (99%), 1 year relative accuracy, dc voltage without internal self-calibration or auto-adjustments
- 0.5 µV/V (95%), 0.65 µV/V (99%), 24 hour stability, dc voltage
- 7 µΩ/Ω (95%), 9 µΩ/Ω (99%), 1 year, resistance
- 2.02x full scale stretches lower noise floor to higher signal levels to maximize higher accuracies from the instrument
- 200 ns to 100 s aperture setting allows the industry’s widest flexibility to control data capture window
Close
Fluke 85RF II High-Frequency Probe, 500 Mhz
Product Features:
- Voltage Range: 0.25 to 30Vrms
- Maximum Input Voltage: 30Vrms, 200V DC
- AC to DC Ratio: 1:1
- Ratio Accuracy (At 25 MHz and loaded with 10 M ohm): Above 0.5V: +/- 0.5 dB; Below 0.5V: +/- 1.0 dB; Add +/- 0.2 dB in RF fields of 1 to 3 V/m
- Frequency Response (Relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB; 100 MHz to 200 MHz +/- 2.0 dB; 200 MHz to 500 MHz +/- 3.0 dB
Close
Fluke 87V Industrial Multimeter
- True-rms ac voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05 % dc accuracy
- 4-1/2 digit mode for precise measurements
- Built-in thermometer lets you carry one less tool
- Large display digits and two-level bright white backlight for increased visibility
- 10,000 µF capacitance range for components and motor caps
- Peak capture to record transients as fast as 250 µs
- Measure up to 1000 V ac and dc
- Measure up to 10 A, 20 A for up to 30 seconds
- Auto and manual ranging for maximum flexibility
- Analog bargraph
- Resistance, continuity and diode test
- Frequency to 200 kHz and % duty cycle
- Min/Max and average recording to capture variations automatically
- Relative mode to remove test lead resistance from low ohms measurements
- Improved sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- Limited lifetime warranty
Close
Fluke 87V-MAX True RMS Digital Multimeter with built-in thermometer
Product Features:
- IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments
- Tested to withstand 4 meter (13 feet) drop (with holster)
- Measure up to 1000 V, up to 10 A (20 A for 30 seconds), AC and DC
- True-RMS voltage and current for accurate measurements on non-linear signals
- 10,000 μF capacitance range, frequency to 200 kHz
- Extended AC voltage bandwidth- 15 Hz to 20 kHz
- Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built in thermometer conveniently allows users to take temperature readings without having to carry a separate instrument
- Min/Max/Average recording, plus 150 μs Peak min-max to capture variations automatically
- Resistance, continuity and diode test
- Large display digits and 2 level bright white backlight with backlit keypad buttons
- Hi resolution 20,000 count display mode
- Relative mode to remove test lead resistance from low ohms measurements
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
- Long battery life (800 hours)
- Safety rated CAT IV 600 V/CAT III 1000 V
- Battery type: Three AA batteries
Applications
- Industrial and facilities maintenance
- Cement plants and electrical utilities
- Food processing and chemical processing
- Steel mills and foundries
- Mining (MHSA approval pending)
- Military, petrochemical
Close
Fluke 87V-MAX/E2 KIT Industrial Electrician Combo Kit
What’s included with the Fluke 87V-MAX/E2 KIT
- Multimeter
- Test Leads
- Alligator Clips
- Test Probes
- Meter Hanging Kit
- Temperature Probe
- Carrying Case
- 9 V Battery (Installed) Removable holster with Test Lead Storage
- 3 x AA Batteries (Installed)
Product Features:
- IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments
- Tested to withstand 4 meter (13 feet) drop (with holster)
- Measure up to 1000 V, up to 10 A (20 A for 30 seconds), AC and DC
- True-RMS voltage and current for accurate measurements on non-linear signals
- 10,000 μF capacitance range, frequency to 200 kHz
- Extended AC voltage bandwidth- 15 Hz to 20 kHz
- Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built in thermometer conveniently allows users to take temperature readings without having to carry a separate instrument
- Min/Max/Average recording, plus 150 μs Peak min-max to capture variations automatically
- Resistance, continuity and diode test
- Large display digits and 2 level bright white backlight with backlit keypad buttons
- Hi resolution 20,000 count display mode
- Relative mode to remove test lead resistance from low ohms measurements
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
- Long battery life (800 hours)
- Safety rated CAT IV 600 V/CAT III 1000 V
- Battery type: Three AA batteries
- Kit includes soft carrying case, probes and magnetic hanging kit
Applications
- Industrial and facilities maintenance
- Cement plants and electrical utilities
- Food processing and chemical processing
- Steel mills and foundries
- Mining (MHSA approval pending)
- Military, petrochemical
Close
Fluke 87V/E2 Industrial Electrician Combo Kit
What’s included with the Fluke 87V/E2
- Multimeter
- Insulated Test Leads
- Alligator Clips
- Test Probes
- Meter Hanging Kit
- Temperature Probe
- Carrying Case
- 9 V Battery
- Lifetime Warranty
Features
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
- True-rms ac voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05% DC accuracy
- 6000 counts, 3-3/4 digits
- 4-1/2 digit mode for precise measurements (20,000 counts)
- Measure up to 1000 V AC and DC
- Measure up to 10 A, 20 A for up to 30 seconds
- Built in thermometer lets you carry one less tool (TC probe included)
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity and diode test
- 10,000 µF capacitance range for components and motor caps
- Min/max-average recording with min/max alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- Classic design with new removable holster with built in test lead and probe storage
- Unique function for accurate measurements of noisy pulse-width modulated AC voltage
- Measures correctly at the ASD and at the motor terminals
- Accurately measure the frequency (motor speed), frequency measurement not affected by the ASDs carrier frequency
- Measure AC current with an optional current clamp accessory
- Compare reading with the display on the ASD
- Special shielding blocks high frequency, high-energy noise generated by large drive systems
