Close
Fluke 87V/IMSK Industrial Multimeter Service KIT with the i400
Features
- Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
- True-RMS AC voltage and current for measuring non-linear signals
- Captures intermittents as short as 250 µS
- Safety rated CAT III 1000 V, CAT IV 600 V
- Built-in thermometer and temperature probe
- Easy access door for fast battery changes without breaking the calibration seal
- Removable holster with built in test lead and probe storage for convenience
- Audible Input Alert warning against wrong use of input jacks
- Provides peak capture and min/max/avg recording
- 6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
- Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Includes an analog bargraph for fast changing or unstable signals
- Presents a large digit display with bright, two-level backlight for easier reading in low light
- Delivers 0.05% DC accuracy
- Measures up to 1000 VAC and DC
- 10,000 µF capacitance range for components and motor caps
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch hold to capture stable readings of noisy signals
- Two-level backlit display
Applications
- Motor drives
- Plant automation
- Power distribution
- Electromechanical equipement
Close
Fluke 87VMAX-PVLEAD1 Solar Tools Kit, 1000 V, 10 A
Features
- True-rms AC voltage and current for accurate measurements on non-linear signals
- Measure up to 1000 V AC and DC
- Measure up to 10 A (20 A for 30 seconds)
- Frequency to 200 kHz
- Built in temperate function conveniently allows you to take temperature readings without having to carry a separate instrument using supplied thermocouple
- Minimum/Maximum/Average recording, plus 250 μs peak minimum to maximum to capture variations automatically
- Unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment
- Large display digits, 2-level bright white backlight and backlit keypad buttons for increased visibility
- Hi resolution 19,999 count display mode
- Long battery life (800 hours)
- IP67 rated; Fully waterproof and dust proof, to work reliably in all the places that you need to work
- Works as long as you do; provides double the battery life of the original model
- Withstands heat and cold; The meter has an extended operating temperature range of -40 (for up to 20 minutes) to 131°F [-40 (for up to 20 minutes) to 55°C]
Close
Fluke 88-5/A KIT Deluxe Automotive Multimeter Combo Kit
Features
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight
- 6000 counts, 3¾ digits
- Measure up to 1000 V AC and DC
- Measure up to 10, 20 A for up to 30 seconds
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity
- RPM measurements with inductive pickup
- Millisecond pulse width measurements for fuel injectors
- 10,000 µF capacitance range for components and motor caps
- Min/max-average recording with min/max alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without opening up the case
- “Classic” design with new removable holster with built in test lead and probe storage
- 10 mΩ input impedance wont load circuits
- 0.1% DC accuracy
Measures
- Resistance, continuity and diode test
- Millisecond pulse width measurements for fuel injectors
- Frequency to 200 kHz and % duty cycle
- Measure up to 1000 V AC and DC
- Measure current up to 10, 20 A for up to 30 seconds
- 4½ digits for precise measurements
- RPM measurements with optional inductive pickup
- Temperature measurements with optional temperature probe
Applications
- Automotive
Close
Fluke 8845A-EFPT Fine Point Extended Test Probe Adaptor Set
Fluke 8845A-EFPT Offers
- One pair (red and black)
- Snaps onto DMM probes with .080 in (2 mm) O.D. Tips
- Designed to IEC 1010 standard
- Adapter allows access to hard-to-reach test points
- Tips are insulated to the point to prevent shorting of adjacent components
Close
Fluke 8845A-TPIT Test Probe IC Tip Set
Fluke 8845A-TPIT Offers
- One pair (red and black)
- Snaps onto DMM probes with .080 in (2 mm) O.D. Tips
- Designed to IEC 1010 standard
- Pin tip jack at the adapter end is recessed for added insulation protection
- Adapter allows easy access to leads of through-hole IC’s
- Insulation at the tip fits between leads to prevent accidental shorting
Close
Fluke 884X-1G USB Memory 1 GB
Fluke 884X-1G Offers
- Used on the 8846A only
- Plugs into USB device host port on the 8846A front panel
- Fully compliant with Universal Serial Bus Specification v2.0
- Dual LED indicates power and busy status
Close
Fluke 884x-CASE Molded Plastic Carrying Case for the 8845A and 8846A
What’s included with the Fluke 884X-CASE
- Carrying Case
- One-Year Warranty
Close
Fluke 884X-RTD 100 Ohm RTD Temperature Probe
Fluke 884X-RTD Offers
Mineral-insulated sheath with a minimum bend radius of 19 mm (3/4 in) for flexibility and durability
Close
Fluke 884X-USB USB to RS-232 Cable Adapter
Fluke 884X-USB Offers
- USB to serial RS-232 interface adapter cable
- Converts from standard DB 9-pin serial to USB 2.0
- Requires an available PC communications port
- Includes cable and USB driver disk (CD-ROM)
Close
Fluke 9009 – Dual Range Dry-Block Calibrator, Black
Fluke 9009 Dual Range Dry-Block Calibrator Offers
Features
- Two independently controlled temperature blocks, one for heating and one for cooling with a combined range of -15 to 350°C
- Unique dual unit allows you to calibrate your sensor in the heated well while the cool well stabilizes; this eliminates the need to wait for multiple temperature points during calibration
- Hot block provides temperatures from 50 to 350°C (122 to 662°F), while the cold block covers the range of -15 to 110°C (5 to 230°F)
- Each block is controlled by a precision Hart Scientific temperature controller
- Cold block is calibrated to within ±0.2°C with stability of ±0.05°C
- Hot block’s display is accurate to ±0.6°C with stability of ±0.05°C
- NIST-traceable calibration is included for each of the two test blocks
- Each temperature block includes two wells with removable inserts; calibrate four probes at once, or calibrate two probes at the same time with an external reference, or use the two temperature wells to get quick “zero” and “span” references for transmitter calibrations
Close
Fluke 9009 Industrial Dual-Block Thermometer Calibrator
- Temperatures from –15 °C to 350 °C in one unit
- Two wells in each block for simultaneous comparison calibrations
- Rugged, lightweight, water-resistant enclosure
Close
Fluke 9011 High-Accuracy Dual-Well Calibrator
- Combined range from –30 °C to 670 °C, one unit – two blocks
- Two independent temperature controllers (hot and cold side)
- Stability to ±0.02 °C
- Multi-hole wells for calibrating up to eight probes simultaneously
