|
Fluke MET/CAL® Warranted Calibration Procedures
MET/CAL® core calibration procedures
A number of example procedures are supplied free with MET/CAL®. You may download these calibration procedures from this website, use them ‘as is’ or as a template for developing your own custom procedures to fit your operation’s specific requirements and calibration workload.
Fluke MET/TEAM® Test Equipment Asset Management Software
- Manage all aspects of your calibration operation with one paperless solution
- Improve productivity and reduce operating costs
- Maintain compliance with regulatory standards
- Configure and customize for your business rules
- Report to meet a wide range of requirements
- Schedule maintenance events
- Perform batch receiving
- Create, track and close work orders
- Track assets as they move through the lab
- Create and print calibration reports
- Maintain an audit trail
- Manage shipping information
- Track customer and vendor information
- View business statuses
- Create data templates and store procedures
- …and much more
Fluke MFC Switchbox™ for molbox1+ and MFC-CB™
MFC Switchbox supplies power and switches between up to five MFC or MFMs on one molbox1+ or MFC-CB channel.
The MFC switchbox is an accessory to the molbox1+ MFC option and MFC-CB mass flow control box. This accessory continuously powers up to five MFCs and/or MFMs (DUTs) and allows switching control between them on one molbox1 or MFC-CB channel.
Fluke MFC-CB Control Box
- Set and read gas mass flow controller and mass flow meter instruments
- Set and read 0 to 5 V or 4 to 20 mA on two (2) channels simultaneously
- Complete front panel local control and remote operation via RS-232 and IEEE-488 interfaces
- Includes advanced features such as two (2) channel sum, difference and ratio
- Displays in V, mA, % FS and flow units
- Handles gas conversion (K) factors automatically
- Switch each channel between five (5) channels using an MFC Switchbox™
- Common look, feel and protocol with other molbloc/ molbox™ flow products
- Compatible with COMPASS® for molbox software to set up automated molbloc/molbox based flow systems
Fluke Mini Fixed-Point Cells
- Lower uncertainties than comparison calibrations
- All ITS-90 fixed points from TPW to copper
- Reduced equipment and annual recalibration costs
Fluke molbloc-L Laminar Flow Element
- Useable with existing molbox1+ and molbox RFM mass flow terminals and COMPASS software
- Integrated filter to protect against contamination
- Integral gas temperature conditioning and measurement
- Continuous, real-time reading
- Can be fully automated
- No moving parts
Fluke molbloc-S Sonic Nozzle Calibration Device
- Covers ranges up to 5,000 slm in N2 and air
- Useable with molbox1+, or existing molbox1 and molbox RFM mass flow terminals and COMPASS software
- Proven critical flow venturi (sonic) nozzle operating principle supported by gravimetric calibration
- Minimal sensitivity to contamination
- Measurement uncertainty:
to ±0.125% of reading with molbox1+
± 0.2 % of reading with molbox1
± 0.5 % of reading with molbox RFM - Air, N2, Ar, He and other calibrations available, humid air density compensation supports use with ambient air
- Excellent rangeability (10:1 turndown), with molbox1+S, or other molbox models with vacuum.
- Redundant absolute upstream pressure measurement using both molbox absolute pressure transducers reduces uncertainty and increases reliability
- Integral gas temperature conditioning and measurement
- Continuous, real-time reading, as with traditional molbloc-L laminar element
- Can be fully automated
Fluke molbox1+ Flow Terminal
- molbox1+S configuration gives extra rangeability with molbloc-S elements without requiring vacuum pumps
- Now use any molbloc element for both high and low pressure applications in the same gas
- Even more robust internal pneumatic design
- Full suite of software automation products and hardware accessories to create a complete gas flow calibration system—including new COMPASS® for Flow calibration assistance software
Fluke molstic-L Mounting Systems
molstic molbloc mounting systems are available to assist you in realizing the full performance benefits of your molbloc/molbox™ system. molstics provide an engineered solution to the practical issues of mounting the molbloc, connecting a gas supply, regulating the pressure and connecting the device to be tested. Highest quality components are integrated into a compact assembly to assure optimum molbloc/molbox performance.
Fluke molstic-S Mounting System
The single channel molstic-S is designed to accommodate one molbloc-S element. The dual channel allows two molbloc-S elements to be simultaneously mounted, allowing use of two ranges without changing hardware during a test. In addition, the outlet of the two molbloc-S elements can be plumbed in parallel using the downstream tee assembly (P/N 401884) in order to obtain additional flow range capacity when using a two-channel molbox1+.
Fluke MPG2-H Manually Operated Pressure Generator Controller for Hydraulic Pressure
Economic solution to manually generate and adjust pressure from atmosphere to as high as
200 MPa (30,000 psi)
• Generates large pressure changes quickly and adjusts pressure precisely at a setpoint
• Self-contained design with compact 26 cm x 44 cm (10.2 in. x 17.3 in.) footprint
• Includes two (2) test ports, with standard high pressure gland and collar fittings
• Ideal for working with high pressure
Fluke Networks GLD3-DSX-8-ADD – 3 Year Gold Support for DSX-8000-ADD
Fluke Networks GLD3-DSX-8-ADD 3 Year Gold Support for the DSX-8000-ADD
- 3 Year Gold Support for the DSX-8000-ADD
- One calibration and factory refresh per year at no charge
- Receive a loaner unit during calibration to eliminate downtime
- 24/7 technical support will toll-free support number
- Covers damage to the tester
- Covers annual traceable calibration, software updates, performance check, refurbishment of worn copper ports and scratched fiber ports
- Covers replacement of damaged parts and accessories that shipped with the unit
- Includes Prepaid express freight with labels
Fluke P3000 Pneumatic Deadweight Testers
- Pressure ranges from vacuum through 2 000 psi (140 bar)
- Accuracy better than .015 % of reading. (Increased accuracy option of 0.008 %)
- Gas operated with optional hand pumps
- Dual vacuum/pressure models available
- Psi, bar, kgf/cm2, kPa and MPa ranges available
- Piston/cylinder design provides stability and repeatability
- Built-in pneumatic hand pumps for pressure and vacuum
- Piston flotation indicator
- High quality needle valves provide optimum control
- Mounted spirit level and adjustable feet
- Test station design with O-rings eliminates the need for PTFE tape or wrenches
- Improved case with springloaded latches for hood
- Sturdy weight box with hinged lid and side handles for easy transport
Fluke P3100 Hydraulic Deadweight Testers
- Pressure ranges to 20,000 psi (1400 bar)
- 0.015% of reading accuracy standard (0.008% optional)
- Single or dual piston formats
- Built-in hand pumps standard
- Mounted spirit level with adjustable feet
- Units can be trimmed to local gravity FOC
Fluke P3200 Hydraulic Deadweight Tester
- Pressure ranges to 10,000 psi (700 bar)
- 0.015% of reading accuracy standard (0.008% optional)
- Single or dual piston formats
- Built-in hand pumps standard
- Mounted spirit level with adjustable feet
- Units can be trimmed to local gravity FOC
Fluke P3800 Hydraulic Deadweight Testers
- Pressure ranges to 60,000 psi (4000 bar)
- Select from two accuracy classes; 0.02% or 0.015% of reading
- Includes hand pump and intensifier for generating high pressures
- Tungsten carbide piston and cylinder provides long term stability and durability
- Mass set can be trimmed to local gravity FOC
Fluke P5500 Adapters, Separators and Dirt/Moisture Traps
Fluke Calibration provides the complete solution for pressure calibration using a deadweight tester, including accessories for test media separation, dirt
Fluke PG7000-AMH – Automated Mass Handler for PG7000 Piston Gauges
The AMH system is an optional accessory to PG7000 platforms. It can be added to existing platforms or ordered with new installations. Two models are available to cover the complete PG7000 line of gas and oil operated piston gauges… including absolute mode with a vacuum reference. Thanks to the PG7000’s unique system architecture, the exact level of automation appropriate for the application can be configured with standard components. Automate mass handling while maintaining direct operator control over pressure generation and adjustment, or use standard pressure controllers to automate pressure control and make fully automated piston gauge operation a reality. In all cases, PG7000’s unified approach assures a simple, integrated system with a single local and remote interface.
Fluke PG7601 Piston Gauge
- State-of-the-art primary pressure standards for the lowest uncertainty levels
- Unified solution from vacuum to 500 MPa
- Outputs fully validated reference pressures in real time
- Intuitive local operator interface
- Manual, semi-automated and fully automated configurations
Fluke PPCH Automated Pressure Controller / Calibrator
- Hydraulic pressure controller to 200 MPa (30,000 psi)
- High precision control
- AutoRange feature
- For liquid pressures up to 30,000 psi (200 MPa)
- One or two Q-RPTs in each controller
- Supports external reference pressure transducers
- FLASH memory for simple and free embedded software upgrades via Fluke Calibration web-site
Fluke Probe Support Hardware
- 2 V-bases
- 1 29-inch stainless steel rod
- 2 23-inch rods
- 5 bossheads
- 2 micro-clamps
- 1 medium clamp
Fluke RPM4 BA100K Reference Pressure Barometer
- Transfer standard level measurement uncertainty, ± 0.01 % of reading (± 0.008 % for dual channel mode)
- Single channel or dual channel with parallel measurementmode to reduce uncertainty and increase reliability
- Large, easy to read display
- RS232 and IEEE-488 interfaces included
- On-board functions including adjustable average time, high/low, deviation from set point, rate, freeze
- 17025 accredited calibration included in purchase price.
- Ideal for absolute pressure AutoZeroing of pressure transfer standards and molbox flow terminals
- Compact and rugged presentation
- Optional battery pack
Fluke RPM4 Reference Pressure Monitor
- Independent quartz reference pressure transducer modules (Q-RPTs) with individual self-defense systems (SDS™) (See Q-RPT module advantages under “Features.”)
- Infinite Ranging and AutoRange™
- Differential measurement mode (channel 1- channel 2)
- 15 kPa (2.2 psi) compound gauge Q-RPT with turndown to < 3 kPa (0.4 psi)
- Integrates with PPC4 as external reference measurement device
- Battery/charger pack available
- RPM4 carries on the tradition of the RPM line of pressure monitors: combining very high end performance with ruggedness and reliability
- Stability based Ready/Not Ready indication
- Built-in fluid head corrections
- User defined pressure units
- Intelligent AutoZero™ function
- Remote [ENTER] switch
- Large character, easy to read display
- 12 V dc power and battery pack option
- External valve drivers
- RS232 and IEEE-488 communications
- PC based recalibration utility software included
- Flash memory for simple and free embedded