700HPF-METFluke P3100SK Seal Kit for P3100 Series Deadweight Testers
What’s included with the Fluke P3100SK
- Fluke P3100SK Seal Kit for P3100 Series Deadweight Testers
884X-SHORT
Fluke 884X-SHORT Offers
- 4-terminal shorting bar
- 4 mm banana terminals sized and orientated to short DMM input source and sense terminals
- Used to null out front end offsets or as required by the calibration procedure
AC288 Terminal Block Probe with Retractable Probe Tip
Key features
- Retractable probe tip designed for increased safety, while providing flexibility to reach deep connection points
- Recommended for use with TL224, TL222 or TL221 Test Leads
- 11.5 cm (4.5 in) insulated, flexible shaft
- 1 mm diameter probe tip extends out to 8.4 mm (0.33 in) length
- Retractable probe tip is made with stainless steel
- Safety rated: IEC 61010-031 Ed.1.12008, CAT III 1000 V, CAT IV 600 V
- Operating temperature: -20 °C to 55 °C (-4 °F to 131 °F), 90% RH
- One-year warranty
DS NECK STRAP
Work hands-free with the DS701 and DS703 FC Diagnostic Videoscopes with this neck strap.
FE AS400
Probe Accessory set for VPS400 Probes.
FE C190 Hard Case for 190 Series
Heavy duty case with accessory storage compartments. 1 year warranty
Fluke 110 True-rms Digital Multimeter
Key features
- True-rms ac voltage for accurate measurements on non-linear signals
- Resistance and continuity
- Large white LED backlight to work in poorly lit areas
Fluke 113 True RMS Utility Multimeter with VCHECK
- VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
- True RMS for accurate AC measurements on non-linear loads
- A large backlit display allows for easy visibility in low-lit areas
- Record signal fluctuations using the Min/Max function
- Diode test for testing general-purpose germanium, silicon, and power diodes
- Integral holster with probe holders for easy storage
- Auto and Manual ranging for added user functionality
- Meets measurement category CAT IV 600 V and Category IV 300 V standards for a higher level of safety
- The optional TPAK magnetic hanger allows the user hands-free flexibility (sold separately)
Fluke 114 True RMS Electrical Multimeter with AutoVolt, 600 V
-
Product Features:
- True RMS measurements
- AutoVolt technology for automatic AC/DC voltage selection
- Large, white, LED backlit display
- Resistance and continuity
- Min/Max/Average records signal fluctuations
- CAT III 600 V safety rated
Fluke 115 Field Technicians Digital Multimeter
- The compact, general purpose troubleshooting tool for field service technicians
Ideal for general purpose electrical and electronic test requirements, this True RMS digital multimeter also provides simple, one-handed operation and compact design for field service technicians. This tool measures the True RMS voltage as well as currents with 6000 count, resistance, continuity, frequency, and capacitance for quick verifications. Additionally, this digital multimeter is independently tested for safe use in CAT III 600V environments.
Features
- Measures resistance, continuity, frequency, capacitance, and diode test
- Measures 10 A (20 A overload for 30 seconds)
- Large white LED backlight to work in poorly lit areas
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger (ToolPak™)
- True RMS for accurate measurements on non-linear loads
- Min/max/average with elapsed time to record signal fluctuations
- CAT III 600 V safety rated
- Measures AC and DC voltage to 600 V
Applications
- Electrical and electronic testing
- Quick verification and field service
Fluke 116 Digital HVAC Multimeter
-
Product Features:
- True RMS measurements
- Built-in thermometer for HVAC applications
- Microamps test flame sensors
- LoZ helps prevent false readings due to ghost voltage
- Large, white, LED backlit display
- Resistance, continuity, frequency and capacitance
- Min/Max/Average with elapsed time records signal fluctuations
- Compact ergonomic design for one-handed operation
- CAT III 600 V safety rated
Fluke 116/323 HVAC/R Combo Kit
Fluke 116 Offers
Features
- Built-in thermometer
- Provides microamps to test flame sensors
- Low input impedance to helps prevent false readings due to ghost voltage
- Large white LED backlight for working in poorly lit areas
- Measures resistance, continuity, frequency, and capacitance
- Provides Min/Max/Average to record signal fluctuations
- Compact ergonomic design for one-handed operation
- Fits into optional ToolPak™ magnetic hanger for hands-free operation (sold separately)
- CAT III 600 V safety rated
Applications
- HVAC/R
Fluke 323 True RMS Clamp Meter
Delivers rugged and reliable performance and includes True RMS measurements, optimized ergonomics, and large display which makes it ideal for troubleshooting. This clamp meter is part of the 320 series and is built to perform in the toughest environments, and provides you with noise-free and reliable results. Its slim, compact size and rugged design makes it well suited for measuring currents up to 400 A in tight cable compartments. Use it to verify the presence of load current, AC voltage, continuity of circuits, switches, fuses, and contacts.
Features
- Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
- Measures AC current to 400 A
- Measures AC voltage and DC voltage to 600 V
- Provides True RMS AC voltage and current for accurate measurements on non-linear signals
- Measures resistance to 4 kΩ with continuity detection
- Slim, ergonomic design for measuring in tight cable compartments
- Presents measurements on a large, easy-to-read display
- Hold function captures a reading on the display
- CAT III 600 V, CAT IV 300 V safety rating
Applications
- Electrical
- Commercial
- Residential
- Plant maintenance
- HVAC/R
Fluke TL175 TwistGuard Test Leads Set
Features
- Patented TwistGuard™ extendable tip
- New WearGuard™ lead wire wear indication
- Double insulated silicone leads
- Extra-heavy duty strain relief on both probe-end and plug-end
- Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
- Conforms to EN61010-031
Applications
- Test and measurement
- Oil and gas
- R&D
- Electronics design
- Electronics service
- Repair and maintenance
- Electrical
- Industrial
Fluke TPAK ToolPak Magnetic Meter Hanger
Features
- Powerful magnetic hanger allows you to hang your meter on any metallic surfaces
- 9″ (228.6 mm) hook and loop strap allows you to loop around pipeS
- Hook hanger for hanging on non-magnetic surfaces
- General purpose hanger allows you to hang your meter on nails, hooks and many other objects
- Compatible with many Fluke instruments
Fluke 80BK-A Integrated DMM Temperature Probe
Features
- Standard shrouded banana jack
- Convenient one piece construction
Fluke 80AK-A Thermocouple Adapter
Applications
- Low voltage (below 30 V AC, 60 V DC)
Fluke C115 Soft Carrying Case
Features
- 2 x padded pockets
- Made out of durable polyester
Facilities Maintenance Challenges and the Fluke Solutions
Facilities maintenance professionals face a wide range of challenges, from electrical and mechanical equipment uptime to overall safety concerns. It’s critical to maintain facilities and the associated assets at peak performance. Let’s review the issues faced by maintenance managers, IT support, and electrical/mechanical technicians. Along with the Fluke solutions that offer to save you time and money while increasing efficiency and safety. Fluke makes reliable, rugged and accurate tools to maintain electromechanical systems, motors, pumps, electrical distribution systems and more to keep your world up and running.