Showing 13–24 of 1386 results

Show sidebar
-10%
Close

Fluke 116/62 MAX+ Technician’s Combo Kit

$729.00
Excluding GST 10%

Fluke 116 Offers

Features

  • Built-in thermometer
  • Provides microamps to test flame sensors
  • Low input impedance to helps prevent false readings due to ghost voltage
  • Large white LED backlight for working in poorly lit areas
  • Measures resistance, continuity, frequency, and capacitance
  • Provides Min/Max/Average to record signal fluctuations
  • Compact ergonomic design for one-handed operation
  • Fits into optional ToolPak™ magnetic hanger for hands-free operation (sold separately)
  • CAT III 600 V safety rated

Applications

  • HVAC/R

Fluke 62 MAX Plus Infrared Thermometer

Infrared thermometers are everything you’d expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maintenance.

If you’ve ever used an infrared thermometer, then you may have been fooled regarding the temperature reading. That’s because IR thermometers project a measurement cone at a surface and take the average temperature of the cone at the target. Although most IR thermometers have a laser pointer, a laser is a line, not a cone, and you may think that you’re getting temperature at the laser point only. It uses two rotating laser pointers that show you the size of the measurement area. It covers the temperature range from -22 to 1202°F (-30 to 650°C) with a response time less than 300 ms. The meters screen is located in a position and with a viewing angle (15°) that, in many cases, lets you see the display without having to move the thermometer from the measuring point. For most measurements, you simply pull the trigger once you’ve identified the measurement point.

Features

  • Dust and water-resistant: IP54 rated for dust and water resistance
  • Drop tested: Rugged enough to survive a 9.8′ (3 m) drop for your most harsh working environments
  • Ergonomically designed for a more natural hand fit
  • Small and lightweight: It clips to your tool belt or belt loop or easily fits into your tool box
  • Distance to spot: Precise laser technology makes for more accurate and repeatable measurements
  • Large, backlit display: Large screen makes data easier to read, even in dark areas
  • Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements
  • Alarm: Hi and Lo alarms for rapid display of measurements outside the limits
  • Power: Powered by a single, standard AA battery

Why IR Thermometers?

Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC/R system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.

Applications

  • Automotive
  • Avionics
  • Building automation
  • Commercial
  • Defence
  • Military and aerospace
  • HVAC/R
  • Industrial
  • Lighting
  • Maintenance and repair

Fluke TL75 Hard Point™ Test Lead Set

Features

  • One pair (red, black) of comfort grip probes
  • 48″ (1.22 m) PVC insulated test leads with right-angle shrouded banana plugs
  • Recommended for general purpose measurements
  • CAT II 1000 V, , 10 A rating
  • CAT IV 600 V, CAT III 1000 V only with protective cap
  • CSA listed

Fluke 80BK-A Integrated DMM Temperature Probe

Features

  • Standard shrouded banana jack
  • Convenient one piece construction

Fluke 80AK-A Thermocouple Adapter

Applications

  • Low voltage (below 30 V AC, 60 V DC)

Fluke 80PK-11 Type-K Velcro Thermocouple Temperature Probe

Designed to be compatible with any temperature measuring instrument that accepts Type-K thermocouples, has a miniature thermocouple connector, and has cold reference junction compensation. Designed for hands free measurement of HVAC/R temperature measuring applications. Use multiple probes and leave in place for route based routine maintenance.

Facilities Maintenance Challenges and the Fluke Solutions

Facilities maintenance professionals face a wide range of challenges, from electrical and mechanical equipment uptime to overall safety concerns. It’s critical to maintain facilities and the associated assets at peak performance. Let’s review the issues faced by maintenance managers, IT support, and electrical/mechanical technicians. Along with the Fluke solutions that offer to save you time and money while increasing efficiency and safety. Fluke makes reliable, rugged and accurate tools to maintain electromechanical systems, motors, pumps, electrical distribution systems and more to keep your world up and running.

-10%
Close

Fluke 117 Electrician’s Multimeter

$361.00
Excluding GST 10%
  • VoltAlert™ technology for non-contact voltage detection
  • AutoVolt automatic ac/dc voltage selection
  • LoZ: helps prevent false readings due to ghost voltage
  • Large white LED backlight to work in poorly lit areas
  • True-rms for accurate measurements on non-linear loads
  • Measures 10 A (20 A overload for 30 seconds)
  • Resistance, continuity, frequency and capacitance
  • Min/max/average to record signal fluctuations
  • Compatible with optional magnetic hanger (ToolPak™) for hands free operation
  • Accurate and easy-to-use
  • Provides low input impedance to help prevent false readings due to ghost voltage
  • CAT III 600 V safety rated
-10%
Close

Fluke 117/323 Electrician’s Combo Kit

$546.00
Excluding GST 10%

Features

  • Fluke 117 electrician’s multimeter
    • VoltAlert™ technology for non-contact voltage detection.
    • AutoVolt automatic ac/dc voltage selection.
    • Low input impedance: Helps prevent false readings due to ghost voltage.
    • Large white LED backlight to work in poorly lit areas.
    • True-rms for accurate measurements on non-linear loads.
    • Measures 10 A (20 A overload for 30-seconds).
    • Resistance, continuity, frequency and capacitance.
    • Min/Max/Average to record signal fluctuations.
    • Compact ergonomic design for one-handed operation.
    • CAT III 600 V safety rated.
  • Fluke 323 clamp meter
    • 400 A ac current measurement.
    • 600 V ac and dc voltage measurement.
    • True-rms ac voltage and current for accurate measurements on non-linear signals.
    • Resistance measurement up to 40 kΩ with continuity detection.
    • Slim, ergonomic design.
    • CAT IV 300V/CAT III 600 V safety rating.
-10%
Close

Fluke 123B Industrial ScopeMeter® Hand-Held Oscilloscope, 20 MHz

$2,642.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 123B/S Industrial ScopeMeter Hand-Held Oscilloscope with the Fluke Vie software, 20 MHz

$2,724.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz or 20 MHz oscilloscope bandwidth
  • Two 5000-count true-rms digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 124B ScopeMeter Oscilloscope

$3,078.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 or 40MHz bandwidth
    • 5mV to 200V/div sensitivity
  • VDC and true-rms VAC ranges from 500mV to 750V
    • 5000 count full scale reading
  • Up to 2200V peak (max, min, & peak-to-peak modes)
    • 5% FS accuracy (min or max), 10% (peak-to-peak)
    • 500 counts full scale reading
  • Up to 70MHz frequency for 124B & 125B
    • Up to 50MHz for 123B
  • Measure resistance, continuity, diode, & capacitance
  • CE & CSA approved, CAT IV 600V safety rated
-10%
Close

Fluke 124B/S Industrial ScopeMeter Hand-Held Oscilloscope with the Fluke View software, 40 MHz

$4,033.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 125B ScopeMeter Oscilloscope

$3,716.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 or 40MHz bandwidth
    • 5mV to 200V/div sensitivity
  • VDC and true-rms VAC ranges from 500mV to 750V
    • 5000 count full scale reading
  • Up to 2200V peak (max, min, & peak-to-peak modes)
    • 5% FS accuracy (min or max), 10% (peak-to-peak)
    • 500 counts full scale reading
  • Up to 70MHz frequency for 124B & 125B
    • Up to 50MHz for 123B
  • Measure resistance, continuity, diode, & capacitance
  • CE & CSA approved, CAT IV 600V safety rated
-10%
Close

Fluke 125B/S Industrial ScopeMeter Hand-Held Oscilloscope with FlukeView software, 40 MHz

$4,760.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 1503 Insulation Resistance Tester

$888.00
Excluding GST 10%

Key features

  • A rugged, compact insulation resistance tester for residential and commercial electricians
  • Performs insulation tests from 0.01 MΩ to 2000 MΩ
  • Offers two insulation test voltages: 500 V and 1000 V
  • Includes live circuit detection to prevent insulation test if voltage >30 V is detected
  • Measures resistance from 0.01 Ω to 20.00 kΩ
-10%
Close

Fluke 1507 Insulation Resistance Tester

$1,146.00
Excluding GST 10%

Key features

  • Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
  • Automatically calculates Polarization Index and Dielectric Absorption Ratio
  • Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
  • Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
-10%
Placeholder
Close

Fluke 1523-CASE Carrying Case for Fluke Reference Thermometers

$830.00
Excluding GST 10%

What’s included with the Fluke 1523-CASE

  • Fluke 1523-CASE Carrying Case for Fluke Reference Thermometers