High Current Precision Shunts – to 3000 A
- 500 to 3000 AMP MODELS
- RATED FOR CONTINUOUS FULL CURRENT
- GOOD LONG TERM STABILITY
- ACCREDITED CALIBRATION INCLUDED
HVA High Voltage Divider
- THIS PAGE FOR REFERENCE ONLY
- MODEL HVA REPLACED BY HVS
- EXISTING MODEL HVA SUPPORTED
HVS High Voltage Standard
- HIGH STABILITY
- HIGH ACCURACY
- UNIQUE GUARDED STRUCTURE
- MODULAR DESIGN
JR-ADC-2 – Fluke Networks JackRapid Termination Tool
Fluke Networks JR-ADC-2 JackRapid Termination Tool for C6 TrueNet KM8 Jack, ADC C6a CopperTen Jack
- Cuts installation time – easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
- High quality, consistent terminations – no more compromised connections and wasted jacks
- Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
- Unique design easily accommodates close-to-wall installation
- Replaceable blade head for use with multiple jack types
JR-ADC-2-H – Fluke Networks JackRapid Replacement Blade Head
Fluke Networks JR-ADC-2-H JackRapid Replacement Blade Head for C6 TrueNet KM8, ADC C6a CopperTen
- Supports ADC jack models: C6a CopperTen® UTP RJ45 jack and the C6 TrueNet® KM8 UTP RJ45
- Compatible with Fluke Networks JR-ERGOHANDLE JackRapid Ergonomic Handle (sold separately)
JR-ERGOHANDLE – Fluke Networks JackRapid Ergonomic Handle
Fluke Networks JR-ERGOHANDLE JackRapid Ergonomic Handle
- Simple, one-handed operation
- Reduces hand fatigue
- Convenient built-in stripper
JR-LEV-1 – Fluke Networks JackRapid PunchDown Tool
JACKRAPID TERMINATION TOOL (FOR LEVITON 41106, 41108, 5G108)
- Easy-to-use tool seats and cuts all wires at once
- Increases productivity – install jacks 8 times faster
- Ergonomic handle
- Convenient, built-in stripper
- Accurate, clean and consistent cuts and terminations
- Consistent terminations every time – no more wasted jacks
- Built-in bed helps hold jack in place
- Replaceable blade heads for use with multiple vendor jack types
- Unique design easily accommodates close-to-wall installations
JR-LEV-1-H – Fluke Networks JackRapid Replacement Blade Head
JACKRAPID REPLACMENT BLADE HEAD (FOR LEVITON 41106, 41108, 5G108)
- Supports Leviton jack models: 41106, 41108 Cat 3/5, 5G108 Cat 5e
- Compatible with Fluke Networks JR-ERGOHANDLE JackRapid Ergonomic Handle (sold separately)
JR-LEV-2 – Fluke Networks JackRapid Punch Down Tool
JACKRAPID TERMINATION TOOL (FOR LEVITON 61110, 5G110, 6110G)
- JackRapid Punch Down Tool for Leviton 61110 5G110 6110G
- Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
- Unique design easily accommodates close-to-wall installation
- Cuts installation time – easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
- High quality, consistent terminations – no more compromised connections and wasted jacks
- Replaceable blade head for use with multiple jack types
JR-LEV-2-H – Fluke Networks JackRapid Replacement Blade Head
JACKRAPID REPLACEMENT BLADE HEAD (FOR LEVITON 61110, 5G110, 6110G)
- Supports Leviton jack models: 5G110 Cat 5e, 61110 Cat 6, 6110G Cat 6
- Compatible with Fluke Networks JR-ERGOHANDLE JackRapid Ergonomic Handle (sold separately)
JR-ORT-2 – Fluke Networks JackRapid Termination Tool
JACKRAPID TERMINATION TOOL (FOR ORTRONICS TJ5E00, TJ600, TJ610)
- JackRapid Termination Tool
- For ORTRONICS TJ5E00, TJ600, TJ610
- Cuts installation time – easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
- High quality, consistent terminations – no more compromised connections and wasted jacks
- Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
- Unique design easily accommodates close-to-wall installation
- Replaceable blade head for use with multiple jack types
JR-ORT-2-H – Fluke Networks JackRapid Replacement Blade Head
JACKRAPID REPLACEMENT BLADE HEAD (FOR ORTRONICS TJ5E00, TJ600, TJ610)
- Used for Ortronics TJ5E00, TJ600, TJ610
- Unique design easily accommodates close to wall installations
- Convenient built-in stripper
- Built-in bed helps hold jack in place
JR-PAN-2 – Fluke Networks JackRapid Termination Tool for PANDUIT NK688M
Fluke Networks JR-PAN-2 JackRapid Termination Tool for the Panduit NK688M and NKP5E88M
- JackRapid Termination Tool
- For PANDUIT NK688M
- High quality, consistent terminations – no more compromised connections and wasted jacks
- Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
- Cuts installation time – easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
- Unique design easily accommodates close-to-wall installation
- Replaceable blade head for use with multiple jack types
JR-PAN-2-H – Fluke Networks JackRapid Replacement Blade Head
Fluke Networks JR-PAN-2-H JackRapid Replacement Blade Head for the Panduit NK688M
- Supports Panduit jack models: NK688M and NKP5E88M
- Compatible with Fluke Networks JR-ERGOHANDLE JackRapid Ergonomic Handle (sold separately)
JR-SYS-2 – Fluke Networks JackRapid PunchDown Tool
JACKRAPID TERMINATION TOOL( FOR SYSTIMAX MGS400, MGS500, MFP420, MFP520)
- Jackrapid PunchDown Tool
- For SYSTIMAX MGS400, MGS500, MFP420, MFP520
- Unique design easily accommodates close-to-wall installation
- Replaceable blade head for use with multiple jack types
- Cuts installation time – easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
- High quality, consistent terminations – no more compromised connections and wasted jacks
- Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
JR-SYS-2-H – Fluke Networks JackRapid Replacement Blade Head
- Supports Systimax jack models: MGS400 Cat 6, MGS500 Cat 6, MFP420 Cat 6, MFP520 Cat 6a
- Compatible with Fluke Networks JR-ERGOHANDLE JackRapid Ergonomic Handle (sold separately)
JR-SYS-UNI-1 – Fluke Networks JackRapid PunchDown Tool
JACKRAPID TERMINATION TOOL (MPS100E, C5, M1BH and UNJ600/500/300)
- Jackrapid PunchDown Tool
- For MPS100E, C5, M1BH, & UNJ600/500/300
- Cuts installation time – easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
- High quality, consistent terminations – no more compromised connections and wasted jacks
- Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
- Unique design easily accommodates close-to-wall installation
- Replaceable blade head for use with multiple jack types
JR-SYS-UNI-1-H – Fluke Networks JackRapid Replacement Blade Head
JACKRAPID REPLACEMENT BLADE HEAD (MPS100E, C5, M1BH and UNJ600/500/300)
- Supports Systimax and Uniprise jack models: M1BH Cat 3, C5 Cat 5, MPS100E Cat 5e, UNJ300 Cat 3, UNJ500 Cat 5e, UNJ600 Cat 6
- Compatible with Fluke Networks JR-ERGOHANDLE JackRapid Ergonomic Handle (sold separately)
KVVB 0.01 % Compact Precision Divider
- MPROVED DESIGN & ACCURACY
- STANDARD & CUSTOM RATIOS TO 10 KV
- 0.01 % RATIO ACCURACY*
Kyoritsu 3132A Insulation & Continuity Tester
- Kyoritsu 3132A – 1000V Analogue Insulation-Continuity Tester
- A highly compact and easy to use insulation and continuity tester.
- Rugged Taut Band meter movement
- Designed to strict CAT III 600V safety standards
- IP54 RATED. The Kyoritsu 3132A has 3 insulation test ranges.
- A 3 ohm continuity range and a 500 ohm resistance range
Kyoritsu 5406A – Digital RCD Tester
- Custom microprocessor controlled for highest accuracy and reliability.
- 3 LEDs for checking correct wiring status.
- 0 and 180 degree phase angle switch permits quick tests and consistent readings.
- Digital read-out of tripping time.
- Constant current source circuitry ensures that a fluctuating mains voltage does not affect the accuracy of readings.
- Large custom digital display readout.
- Visual indication of reversed phase and neutral wiring at socket.
- Designed to IP54 Rating.
- Complies with IEC 61557
- Test of a large kind of RCD’s: Standard, Selective, AC and A (DC sensitive
Kyoritsu 6205 – Portable Appliance Tester Battery Operated
Protect life and property from faulty appliances
・Battery operated
・PASS / FAIL result
・Color status back light
・10 mA & 30 mA RCD test(Isolation transformer built in)
Memory function up to 999 data
・Printer output
・Complies to AS / NZS 3760
LEAD-ABN-100 – Fluke Networks Test Lead with Angled Bed-of-Nails Clips
Fluke Networks LEAD-ABN-100 Test Lead with Angled Bed of Nails for the TS100 Pro
- Braided cables for durability and insulating boots over clips for safety
- Incorporated strain relief for durability
- Field replaceable
- BNC to ABN
LEAD-ABN-PPIN – Fluke Networks Test Leads Angled Bed-of-Nails Clips
Fluke Networks LEAD-ABN-PPIN Test Lead ABN with Piercing Pin Clips, for the TS54, 53, 23
- Braided cables for durability and insulating boots over clips for safety
- Field replaceable
LEAD-ABNP-100 – Fluke Networks Test Lead with Angled Bed-of-Nails Clips and Piercing Pin Clips
Fluke Networks LEAD-ABNP-100 Test Lead ABN with Piercing Pin for the TS100, TS100 Pro
- Braided cables for durability and insulating boots over clips for safety
- Incorporated strain relief for durability
- Field replaceable
- BNC to ABN with PP
LEAD-ABNPRJ11 – Fluke Networks Test Leads with Angled Bed-of-Nails Clips Piercing
Fluke Networks LEAD-ABNPRJ11 Test Lead ABN with Piercing Pin Clips and RJ11, for the TS54, 53, 23
- Braided cables for durability and insulating boots over clips for safety
- Field replaceable
LEAD-ALIG-100 – Fluke Networks Test Lead with Alligator Clips
Fluke Networks LEAD-ALIG-100 Test Lead with Alligator Clips for the TS100, TS100 Pro
- Braided cables for durability and insulating boots over clips for safety
- Incorporated strain relief for durability
- Field replaceable
- BNC to Alligator Clips
LEAD-ALIG-CLP – Fluke Networks Test Leads with Alligator Clip
Fluke Networks LEAD-ALIG-CLP Test Lead with Alligator Clips for the TS54, 53, 23
- Braided cables for durability and insulating boots over clips for safety
- Field replaceable
LEAD-BANA-CLP – Fluke Networks Test Leads with 4 mm Banana Plugs
Fluke Networks LEAD-BANA-CLP Test Lead 4mm Banana, X-Lg Alligator Test Probe for the TS54, 53, 23
- Braided cables for durability and insulating boots over clips for safety
- Field replaceable
LEAD-PIRC-PIN – Fluke Networks Test Leads with Piercing Pin Clips
- Braided cables for durability and insulating boots over clips for safety
- Field replaceable
Test Leads with Piercing Pin Clips for TS54, TS53, TS23 Test Sets sold separately.
LIQ-100 – Fluke Networks LinkIQ™ Cable+Network Tester
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
LIQ-100-IE – Fluke Networks LINKIQ™ Industrial Ethernet Tester
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
LIQ-KIT – Fluke Networks LinkIQ Cable+Network Tester Kit
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
LIQ-KIT-IE – Fluke Networks LINKIQ™ Industrial Ethernet Kit
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
M1120 NST Neutral Supply Tester Kit
LCD screen to display measurement results and messages.
CAT IV 600V instrument and lead set compliance.
IP54 moisture and dust ingress rating.
Compact hand held unit housed in a lightweight heavy-duty case
Uniquely self powered passive device.
Power is taken directly from the user’s connections.
3 LED indicators and an LCD screen for status and measurement information.
An audible alarm is fitted internally as a secondary indicator. To indicate a pass at the end of the measurement cycle or a measurement failure.
MICRO-DIT – Fluke Networks MicroScanner Kit Soft Carry Duffle
Fluke Networks MICRO-DIT Micro IT Kit Soft Carry Duffle
- Soft case
- For CIQ-KIT and MS2-KIT