Close
Fluke 87V Industrial Multimeter
- True-rms ac voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05 % dc accuracy
- 4-1/2 digit mode for precise measurements
- Built-in thermometer lets you carry one less tool
- Large display digits and two-level bright white backlight for increased visibility
- 10,000 µF capacitance range for components and motor caps
- Peak capture to record transients as fast as 250 µs
- Measure up to 1000 V ac and dc
- Measure up to 10 A, 20 A for up to 30 seconds
- Auto and manual ranging for maximum flexibility
- Analog bargraph
- Resistance, continuity and diode test
- Frequency to 200 kHz and % duty cycle
- Min/Max and average recording to capture variations automatically
- Relative mode to remove test lead resistance from low ohms measurements
- Improved sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- Limited lifetime warranty
Close
Fluke 87V-MAX True RMS Digital Multimeter with built-in thermometer
Product Features:
- IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments
- Tested to withstand 4 meter (13 feet) drop (with holster)
- Measure up to 1000 V, up to 10 A (20 A for 30 seconds), AC and DC
- True-RMS voltage and current for accurate measurements on non-linear signals
- 10,000 μF capacitance range, frequency to 200 kHz
- Extended AC voltage bandwidth- 15 Hz to 20 kHz
- Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built in thermometer conveniently allows users to take temperature readings without having to carry a separate instrument
- Min/Max/Average recording, plus 150 μs Peak min-max to capture variations automatically
- Resistance, continuity and diode test
- Large display digits and 2 level bright white backlight with backlit keypad buttons
- Hi resolution 20,000 count display mode
- Relative mode to remove test lead resistance from low ohms measurements
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
- Long battery life (800 hours)
- Safety rated CAT IV 600 V/CAT III 1000 V
- Battery type: Three AA batteries
Applications
- Industrial and facilities maintenance
- Cement plants and electrical utilities
- Food processing and chemical processing
- Steel mills and foundries
- Mining (MHSA approval pending)
- Military, petrochemical
Close
Fluke 87V-MAX/E2 KIT Industrial Electrician Combo Kit
What’s included with the Fluke 87V-MAX/E2 KIT
- Multimeter
- Test Leads
- Alligator Clips
- Test Probes
- Meter Hanging Kit
- Temperature Probe
- Carrying Case
- 9 V Battery (Installed) Removable holster with Test Lead Storage
- 3 x AA Batteries (Installed)
Product Features:
- IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments
- Tested to withstand 4 meter (13 feet) drop (with holster)
- Measure up to 1000 V, up to 10 A (20 A for 30 seconds), AC and DC
- True-RMS voltage and current for accurate measurements on non-linear signals
- 10,000 μF capacitance range, frequency to 200 kHz
- Extended AC voltage bandwidth- 15 Hz to 20 kHz
- Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built in thermometer conveniently allows users to take temperature readings without having to carry a separate instrument
- Min/Max/Average recording, plus 150 μs Peak min-max to capture variations automatically
- Resistance, continuity and diode test
- Large display digits and 2 level bright white backlight with backlit keypad buttons
- Hi resolution 20,000 count display mode
- Relative mode to remove test lead resistance from low ohms measurements
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
- Long battery life (800 hours)
- Safety rated CAT IV 600 V/CAT III 1000 V
- Battery type: Three AA batteries
- Kit includes soft carrying case, probes and magnetic hanging kit
Applications
- Industrial and facilities maintenance
- Cement plants and electrical utilities
- Food processing and chemical processing
- Steel mills and foundries
- Mining (MHSA approval pending)
- Military, petrochemical
Close
Fluke 87V/E2 Industrial Electrician Combo Kit
What’s included with the Fluke 87V/E2
- Multimeter
- Insulated Test Leads
- Alligator Clips
- Test Probes
- Meter Hanging Kit
- Temperature Probe
- Carrying Case
- 9 V Battery
- Lifetime Warranty
Features
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
- True-rms ac voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05% DC accuracy
- 6000 counts, 3-3/4 digits
- 4-1/2 digit mode for precise measurements (20,000 counts)
- Measure up to 1000 V AC and DC
- Measure up to 10 A, 20 A for up to 30 seconds
- Built in thermometer lets you carry one less tool (TC probe included)
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity and diode test
- 10,000 µF capacitance range for components and motor caps
- Min/max-average recording with min/max alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- Classic design with new removable holster with built in test lead and probe storage
- Unique function for accurate measurements of noisy pulse-width modulated AC voltage
- Measures correctly at the ASD and at the motor terminals
- Accurately measure the frequency (motor speed), frequency measurement not affected by the ASDs carrier frequency
- Measure AC current with an optional current clamp accessory
- Compare reading with the display on the ASD
- Special shielding blocks high frequency, high-energy noise generated by large drive systems
Close
Fluke 87V/IMSK Industrial Multimeter Service KIT with the i400
Features
- Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
- True-RMS AC voltage and current for measuring non-linear signals
- Captures intermittents as short as 250 µS
- Safety rated CAT III 1000 V, CAT IV 600 V
- Built-in thermometer and temperature probe
- Easy access door for fast battery changes without breaking the calibration seal
- Removable holster with built in test lead and probe storage for convenience
- Audible Input Alert warning against wrong use of input jacks
- Provides peak capture and min/max/avg recording
- 6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
- Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Includes an analog bargraph for fast changing or unstable signals
- Presents a large digit display with bright, two-level backlight for easier reading in low light
- Delivers 0.05% DC accuracy
- Measures up to 1000 VAC and DC
- 10,000 µF capacitance range for components and motor caps
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch hold to capture stable readings of noisy signals
- Two-level backlit display
Applications
- Motor drives
- Plant automation
- Power distribution
- Electromechanical equipement
Close
Fluke 87VMAX-PVLEAD1 Solar Tools Kit, 1000 V, 10 A
Features
- True-rms AC voltage and current for accurate measurements on non-linear signals
- Measure up to 1000 V AC and DC
- Measure up to 10 A (20 A for 30 seconds)
- Frequency to 200 kHz
- Built in temperate function conveniently allows you to take temperature readings without having to carry a separate instrument using supplied thermocouple
- Minimum/Maximum/Average recording, plus 250 μs peak minimum to maximum to capture variations automatically
- Unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment
- Large display digits, 2-level bright white backlight and backlit keypad buttons for increased visibility
- Hi resolution 19,999 count display mode
- Long battery life (800 hours)
- IP67 rated; Fully waterproof and dust proof, to work reliably in all the places that you need to work
- Works as long as you do; provides double the battery life of the original model
- Withstands heat and cold; The meter has an extended operating temperature range of -40 (for up to 20 minutes) to 131°F [-40 (for up to 20 minutes) to 55°C]
Close
Fluke 88-5/A KIT Deluxe Automotive Multimeter Combo Kit
Features
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight
- 6000 counts, 3¾ digits
- Measure up to 1000 V AC and DC
- Measure up to 10, 20 A for up to 30 seconds
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity
- RPM measurements with inductive pickup
- Millisecond pulse width measurements for fuel injectors
- 10,000 µF capacitance range for components and motor caps
- Min/max-average recording with min/max alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without opening up the case
- “Classic” design with new removable holster with built in test lead and probe storage
- 10 mΩ input impedance wont load circuits
- 0.1% DC accuracy
Measures
- Resistance, continuity and diode test
- Millisecond pulse width measurements for fuel injectors
- Frequency to 200 kHz and % duty cycle
- Measure up to 1000 V AC and DC
- Measure current up to 10, 20 A for up to 30 seconds
- 4½ digits for precise measurements
- RPM measurements with optional inductive pickup
- Temperature measurements with optional temperature probe
Applications
- Automotive
Close
Fluke 8845A-EFPT Fine Point Extended Test Probe Adaptor Set
Fluke 8845A-EFPT Offers
- One pair (red and black)
- Snaps onto DMM probes with .080 in (2 mm) O.D. Tips
- Designed to IEC 1010 standard
- Adapter allows access to hard-to-reach test points
- Tips are insulated to the point to prevent shorting of adjacent components
Close
Fluke 8845A-TPIT Test Probe IC Tip Set
Fluke 8845A-TPIT Offers
- One pair (red and black)
- Snaps onto DMM probes with .080 in (2 mm) O.D. Tips
- Designed to IEC 1010 standard
- Pin tip jack at the adapter end is recessed for added insulation protection
- Adapter allows easy access to leads of through-hole IC’s
- Insulation at the tip fits between leads to prevent accidental shorting
Close
Fluke 884X-1G USB Memory 1 GB
Fluke 884X-1G Offers
- Used on the 8846A only
- Plugs into USB device host port on the 8846A front panel
- Fully compliant with Universal Serial Bus Specification v2.0
- Dual LED indicates power and busy status
Close
Fluke 884x-CASE Molded Plastic Carrying Case for the 8845A and 8846A
What’s included with the Fluke 884X-CASE
- Carrying Case
- One-Year Warranty
Close
Fluke 884X-RTD 100 Ohm RTD Temperature Probe
Fluke 884X-RTD Offers
Mineral-insulated sheath with a minimum bend radius of 19 mm (3/4 in) for flexibility and durability
