-10%
Close
Fluke 7109-2027 Adjustable Probe Holding Fixture
What’s included with the Fluke 7109-2027
- Fluke 7109-2027 Adjustable Probe Holding Fixture
Close
Fluke 7109-2051 Single Probe Clamp Kit
What’s included with the Fluke 7109-2051
- Fluke 7109-2051 Single Probe Clamp Kit
-10%
Close
Fluke 7109-2080 Fluid Overflow Kit
What’s included with the Fluke 7109-2080
- Fluke 7109-2080 Fluid Overflow Kit
-10%
Close
Fluke 7109-CASE Carrying Case
What’s included with the Fluke 7109-CASE
- Fluke 7109-CASE Carrying Case
-10%
Close
Fluke 717-10000G Pressure Calibrator 10000 Psig
Fluke 717-10000G Offers PRESSURE CALIBRATOR 10000 PSIG
Fluke 719PRO-300G Electric Pressure Calibrator, 300 PSI/20 Bar
Features
- Electric pump for one handed pressure calibration
- Best in class pressure measurement uncertainty of 0.025%
- Measure and source mA with best in class 0.015% accuracy
- Precision pressure adjust vernier for accurate pressure calibration
- Variable release rate bleed valve for easy pressure adjustment
- Programmable pressure calibrator pump limit: eliminates over-pressurization and allows the user to program target pressures for pumping
- Programmable 3-tiered display for maximum flexibility when displaying pressure, temperature, and electrical parameters of your choice
- Display backlight
- Damping, Min/Max, and % error function
- Source mA with simultaneous pressure measurement to test valves and I/Ps
- Simulate mA signals to troubleshoot 4-20 mA loops
- Test pressure switches with built in switch test function
- Power transmitters during test using 24 V loop supply with simultaneous mA measurement
- Precision temperature measurement with the addition of an accessory RTD probe (available as an option)
- Proven cleanout ports reduce pump failures
- Moisture trap included with the unit helps mitigates risk of moisture damage
Applications
- Pressure Instrument Calibration
- Pressure Instrument Maintenance
- Petro-Chemical
- Oil and Gas
- Pharmaceutical
- Water and wastewater
- Food and Beverage
- Power Generation
-10%
Close
Fluke 7526A-CASE Carrying Case for 7526A Precision Process Calibrators
Features
- Carrying case for the 7526A Precision Process Calibrator
- 4 “press-and-pull” latches; 2 hasps can be padlocked
- Double-layered, comfort-grip handles
- Watertight
Fluke 754HCC Hart Communication Cable 754
What’s included with the Fluke 754HCC Fluke 754HCC Hart Communication Cable 754
Fluke 77 IV Digital Multimeter
- AC / DC voltage & current
- Wide 1000 V measurement range
- Average responding AC measurements
- 0.3% accuracy
- 10 Amps continuous (20A for 30 seconds)
- Frequency and capacitance
- Resistance and continuity
- Diodes
-10%
Close
Fluke 7XX CABLE USB 5 Pin LEMO, SGL 6′
For use with the 7XX Multifunctional Process Calibrators. What’s included with the Fluke 7XX CABLE Fluke 7XX CABLE USB 5
-10%
Close
Fluke 8.5MM/1.2M Probe Scope with Probe, 8.5 mm x 1.2 m
Fluke 8.5MM/1.2M Probe Offers
Ideal for remote ispection and monitoring.
Applications
- Light Industrial:
- Quality control testing
- Machinery maintenance inspections
- Inspect switches and gears
- Elevator inspections
- Inspect welds
- Heavy Duty Equipment:
- Inspect hydraulic lines
- Inspect welds
- Energy:
- Electrical, inspecting runs
-10%
Close
Fluke 8.5MM/1M UVProbe Scope with Ultra Violet Probe, 8.5 mm x 1 m
1 Meter long, 8.5mm ultraviolet videoscope probe comes with a dual view camera.
-10%
Close
Fluke 8.5MM/3M Probe Scope with Probe, 8.5 mm x 3 m
Fluke 8.5MM/3M Probe Offers
Ideal for remote ispection and monitoring.
Applications
- Light Industrial:
- Quality control testing
- Machinery maintenance inspections
- Inspect switches and gears
- Elevator inspections
- Inspect welds
- Heavy Duty Equipment:
- Inspect hydraulic lines
- Inspect welds
- Energy:
- Electrical, inspecting runs
Fluke 805 FC Vibration Meter
Features
- Low frequency range:10 Hz to 1,000 Hz
- High frequency range: 4,000 Hz to 20,000 Hz
- Crest Factor+ technology
- Four-level severity scale
- Exportable data via USB
- Trending in Microsoft® Excel using built-in templates
- Saves up to 3,500 measurements
- Compatible with Fluke Connect Mobile App
-10%
Close
Fluke 805ES – EXTERNAL VIBRATION SENSOR
- Low-profile 90-degree sensor body allows the sensor to get into tight spots
- Rugged, coiled cable minimizes dangling, while stretching to more than 7ft when needed
- Powerful “U” shaped magnet mount creates a firm connection to flat, or curved measurement surfaces
- Rugged, sealed cable connector with strain relief tail reduces cable wear
- Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment
- Connects directly to 805 Vibration Meter SMB connector located in the heel of the meter
-10%
Close
Fluke 80AK-A Thermocouple Adapter
Product Features:
- Adapts K-Type thermocouple mini-connector-to-dual shrouded banana plug inputs
- Measurement range and accuracy: probe dependent
- Suitable for low voltage applications (below 30V AC, 60V DC)
Compatible with
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 233 Remote Display Digital Multimeter
- Fluke 233/A Remote Display Automotive Digital Multimeter Kit
- Fluke 27 II Rugged Digital Multimeter
- Fluke 28 II Rugged Digital Multimeter
- Fluke 287 True RMS Electronics Logging Multimeter
- Fluke 289 True RMS Data Logging Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 80BK-A Integrated DMM Temperature Probe
Features
- Standard shrouded banana jack
- Convenient one piece construction
Compatible with
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 287 True RMS Electronics Logging Multimeter
- Fluke 289 True RMS Data Logging Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 80CJ-M type J Male Mini-Connectors
Product Features:
- Isothermal screw terminals for J wire
- Suitable for up to 20 gauge thermocouple wire
- Color coded to industry standards (J-black)
- For use with Models 51, 52, 53, 54, 714, 714B, 724, 725 and 726
- Pack of 2
Fluke 80CK-M type K Male Mini-Connectors
Fluke 80CK-M Offers
For use with Fluke 80TK or Fluke 50 Series.
- Isothermal screw terminal for K wire
- Suitable for up to 20 gauge thermocouple wire
- Color-coded to industry standards (K-yellow)
- Two male mini-connectors per package
- One-year warranty
Fluke 80i-110s AC/DC Current Clamp
Features
- 10 or 100A AC/DC nominal current range
- Continuous current range
- 0.1 to 10A AC/DC (100mV/A output)
- 1 to 100A AC/DC (10mV/A output)
- ±3% of reading +50mA (100mV/A, 50mA to 10A)
- ±4% of reading +50mA (10mV/A, 50mA to 40A)
- ±12% of reading +50mA (40 to 80A)
- ±15% of reading (80 to 100A)
- Maximum non-destructive current of 140A (2kHz)
- Lowest measurable current of 0.1A
- 100kHz useable frequency
- CAT II 600V & CAT III 300V
- 1-year warranty
Fluke 80i-2010s AC/DC Current Clamp, 2000 A
An open-jaw, clamp-on current probe with a current range of 2000 A, and an accuracy of 0.8%, that is also
Fluke 80i-2010s/3PK AC/DC Current Clamp, 2000 A, 3-pack
An open-jaw, clamp-on current probe with a current range of 2000 A, and an accuracy of 0.8%, that is also
Fluke 80K-15 High Voltage Probe
Product Features:
- Voltage range: 1kV to 15kV DC or peak AC, 10kVrms AC
- Input resistance: 1000 Megohm
- Division ratio: 1000:1
- Safety rating(s): IEC 1010-2-031:1993, Type B, 10kV DC or peak AC, 10kVrms AC, Overvoltage Category I (voltages derived from limited energy transformer)
- Required meter input resistance: 10 Megohm
Fluke 80K-40 High Voltage Probe
Product Features:
- Voltage range: 1kV to 40kV DC or peak AC, 28kVrms AC
- Input resistance: 1000 Megohm
- Division ratio: 1000:1
- Safety rating(s): IEC 1010-2-031:1993, Type B, 40kV DC or peak AC, 28kVrms AC, Overvoltage Category I (voltages derived from limited energy transformer)
- Required meter input resistance: 10 Megohm
Fluke 80K-6 KV High Voltage Probe
Product Features:
- Voltage range: 0 to 6kV DC, or peak AC
- Input resistance: 75 Megohm nominal
- Division ratio: 1000:1
- Safety rating(s): CAN/CSA C22.2 No. 1010.2.031-94 and IEC 1010-2-031:1993, Type B, 6kV DC or peak AC, 4.24kVrms AC, Overvoltage CAT I (Voltage derived from limited energy transformers)
- Required meter input resistance: 10 Megohm
Fluke 80PJ-1 Type J Bead Probe
Fluke 80PJ-1 Offers
- This basic, inexpensive thermocouple offers good accuracy and fast response. (Not suitable for liquid immersion.)
- Type-J thermocouple for general purpose applications
- Measurement range: -40 to 260°C
Fluke 80PJ-9 General Purpose Probe
Fluke 80PJ-9 Offers
- J-type probe for use on surfaces and for insertion into air and non-caustic gases.
- Probe constructed with 304 stainless steel is compatible with J-type thermometers.
- Measurement range:-40°C to 260 °C
Fluke 80PJ-9 Specifications
Measurement Range F ( C ) -40 to 500F (-40 to 260C)
Accuracy (degree + or -) 1.1C at 0 to 260C
Probe Tip O.D. inches (mm) 0.375 (9.5)
Probe Tip Length inches (mm) 5.5 (140)
Cable Length inches (meters) 40 (1)
Manufacturer’s Warranty 1-year
Fluke 80PJ-EXT Extension Wire Kit
- Extending and repairing J-type thermocouple wires
- Kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors
- Maximum continuous exposure temperature: 260°C
- 80PJ-EXT is designed for J-type thermometers
- One year warranty
Fluke 80PK-1 Beaded K-Type Probe
Product Features:
- Type-K thermocouple
- For General purpose applications
- Measurement range: -40 to 260 °C (40 to 500 °F)
- One year warranty
-10%
Close
Fluke 80PK-10 Pipe Clamp Temperature Probe
- Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces
- For pipe diameters: 32 mm to 64 mm (1.25 in to 2.5 in)
- Measurement range: -29 °C to149 °C (-20 °F to 300 °F)
- Measurements are repeatable to 0.56 °C (1 °F)
- Durable ribbon sensor
- 1 m (39 in) lead
- One year warranty
-1%
Close
Fluke 80PK-11 Type-K Thermocouple
Product Features:
- Type-K thermocouple
- Designed for hands free measurement of HVAC temperature measuring applications
- Use multiple and leave in place for route based routine maintenance
- Use with any temperature-measuring instrument designed to accept Type-K thermocouples
- Measurement range: -30 to 150 °C (-22 to 302 °F)
- Accuracy: ±1.5 °C (±2.7 °F)
- Measurement time (time constant): 10 seconds
- Maximum voltage: 24 V AC rms or 60 V DC maximum for proper safe operation
- Maximum temperature: 150 °C (302 °F)
- Cable:
- Total length: 1 m (40 in), 0.97 m (38 in) lead wire, 49.5 cm (19.5 in) fabric hook-and-loop fastener cuff
- Insulation material: Hytrel
- Width of attachment material: 2.5 cm (1 in)
- Min usable pipe diameter: 3.8 cm (1.5 in)
- Max. usable pipe diameter: 14 cm (5.5 in)
- Connector:
- Type: Yellow mini-thermocouple with 0.500 in pin
- Material: Hytrel 4774
- Maximum temperature: 200 °C (392 °F)
- One year warranty
Fluke 80PK-18 Probe Kit
Product Features:
- Type-K thermocouples for fast temperature and super-heated measurements of pipe surfaces
- For pipe diameters: 6.4 mm to 64 mm (0.25 in to 2.5 in)
- 80PK-8: 6.4 mm to 34.9 mm (0.25 in to 1.375 in)
- 80PK-10: 32 mm to 64 mm (1.25 in to 2.5 in)
- Measurement range: 29 to149 °C (-20 to 300 °F)
- Measurements are repeatable to 0.56 °C (1 °F)
- Durable ribbon sensor
- 1 m (39 in) lead
- One year warranty
-10%
Close
Fluke 80PK-22 Temperature Probe
Features
- The thermocouple junction is protected from tip to handle by an Inconel sheath
Applications
- Liquid
- Gels
Compatible with
- Fluke 51 II Handheld Digital Probe Thermometer
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 787 ProcessMeter Digital Multimeter
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 175 True RMS Digital Multimeter
- Fluke 179 True RMS Digital Multimeter
- 568 Contact and Infrared Temperature Gun
- 568 Ex Intrinsically Safe Mini Infrared Thermometer
Fluke 80PK-24 Air Temperature Probe
Features
- Bead protected by perforated baffle
- Type-K thermocouple for use in air and non-caustic gas measurements
- -40 to 1500°F (-40 to 816°C) temperature range
- Gripping surface made from thermoplastic rubber
- 1-year warranty
Fluke 80PK-25 Piercing Temperature Probe
Product Features:
- Type-K thermocouple suitable for food industry, liquids and gels
- Gripping surface made from thermoplastic rubber
- Measurement range : -40 to 260 °C (-40 to 500 °F)
- One year warranty
Fluke 80PK-25 Offers
Applications
- Food industry
- Liquids
- Gels
Compatible with
- Fluke 51 II Handheld Digital Probe Thermometer
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 787 ProcessMeter Digital Multimeter
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- 572-2 High Temperature Infrared Thermometer
- 568 Ex Intrinsically Safe Mini Infrared Thermometer
Fluke 80PK-26 Tapered Temperature Probe
Fluke 80PK-26 Offers
Features
- Tapered tip
- Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications
- Measurement range: -40 to 816 °C (104 to 1500 °F)
- One year warranty
Applications
- Air
- Non-caustic gas
- Surface
Compatible with
- Fluke 51 II Handheld Digital Probe Thermometer
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 787 ProcessMeter Digital Multimeter
- Fluke 287 True-RMS Electronics Logging Multimeter
- Fluke 289 True RMS Data Logging Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- 572-2 High Temperature Infrared Thermometer
- 568 Ex Intrinsically Safe Mini Infrared Thermometer
