Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe
Product Features:
- Type-K thermocouple
- Durable ribbon sensor
- Measurement range: -127 to 600 °C (-196 to 1112 °F)
- One year warranty
Compatible with
Compatible with any temperature measuring instrument that accepts type K thermocouples features a miniature connector input and a cold reference junction compensation. Additionally, this industrial surface temperature probe is ideal for surfaces in rugged environments.
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 233 Remote Display Digital Multimeter
- Fluke 27 II Rugged Digital Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
- 572-2 High Temperature Infrared Thermometer
- 568 Ex Intrinsically Safe Mini Infrared Thermometer
Fluke 80PK-3A Surface Probe
Fluke 80PK-3A Offers
Features
- Measures temperature of flat or slightly convex surfaces
- Exposed junction to allow direct contact with the surface being measured
Compatible with
- Fluke 51 II Handheld Digital Probe Thermometer
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 233 Remote Display Digital Multimeter
- Fluke 27 II Rugged Digital Multimeter
- Fluke 28 II Rugged Digital Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 80PK-8 Pipe Clamp Temperature Probe
Product Features:
- Type-K thermocouple for fast temperature and super-heateded measurements of pipe surfaces
- For pipe diameters: 6.4 to 34.9 mm (0.25 to 1.37 in)
- Measurement range: -29 to 149 °C (-20 to 300 °F)
- Measurements are repeatable to 0.56 °C (1 °F)
- Durable ribbon sensor
- One year warranty
Fluke 80PK-9 General Purpose Probe
Digital Multimeters
- Fluke 114 Electrical Multimeter
- Fluke 116 Digital HVAC/R Multimeter
- Fluke 233 Remote Display Digital Multimeter
- Fluke 27 II Rugged Digital Multimeter
- Fluke 28 II Rugged Digital Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
IR Thermometers
- Fluke 561 HVAC/R Infrared & Contact Thermometer
- Fluke 568 Contact & Infrared Temp Gun
- Fluke 572-2 High Temperature Infrared Thermometer
Intrinsically Safe
- Fluke 568 Ex Intrinsically Safe Mini Infrared Thermometer
Fluke 80PK-EXT Extension Wire Kit
Product Features:
- Type-K thermocouple extending and repairing kit
- Kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors
- Maximum continuous exposure temperature: 260°C
- 80PK-EXT is compatible with K-type thermometers
- One year warranty
-10%
Close
Fluke 80PR-60 RTD Temperature Probe
- Probe type: RTD (resistance temperature detector)
- Probe element: Platinum 1 KW
- Temperature range: -40 to 260 °C (-40 to 500 °F)
- Accuracy: ± 1 °C (± 2 °F)
- Jack: 3.5 mm phono type
- Probe diameter: 4.8 mm (.187 in)
- Probe length: 90 mm (3.5 in)
- Cable length (extended): 1000 mm (40 in)
- For use with the Fluke 66 and Fluke 68
-10%
Close
Fluke 80PT-25 SureGrip Piercing Temperature Probe
Product Features:
- T-Type piercing thermocouple probe for liquids, gels, soft, and semi-hard materials
- Measurement range: -196° to 350 °C
- For use with Models 714, 714B, 725, 726, 753 and 754
- Operates with T-type thermometers
-10%
Close
Fluke 80PT-EXT Extension Wire Kit
Fluke 80PT-EXT Offers
Extending and repairing T-type thermocouple wires
Kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors
Maximum continuous exposure temperature: 260°C
80PT-EXT is designed for T-typethermometers
One year warranty
- 1 – Thermocouple Wire, 9 ft.
- 1 – Male/Female Mini-Connector Pair
Fluke 80T-150UA Universal Temperature Probe
Product Features:
- High accuracy and fast reading for low voltage (below 24 V AC, 60 V DC) applications
- Measurement range: -50° to 150°C
- Output: 1 mV/°C or 1 mV/°F (switchable)
-10%
Close
Fluke 80TK Thermocouple Module
Features
- Converts a DMM to a thermometer
- For use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC)
- Measurement range: -58 to 1832°F (-50 to 1000°C) (probe dependent)
Close
Fluke 810 Vibration Tester
Features
- Plain-text diagnosis of standard faults:
- Unbalance
- Looseness
- Misalignment
- Bearing failures
- Fault severity (slight, moderate, serious, extreme)
- 200 rpm to 12000 rpm machine rotational speed range
- 5 Hz to 20 kHz Usable frequency bandwidth
- 2.56 kHz to 51.2 kHz sampling rate
- Lithium-ion, 14.8 V, 2.55 Ah battery
- 1/4 VGA, 320 × 240 color display
- Auto ranging
-10%
Close
Fluke 810 Vibration Tester – Quick Disconnect Cable
Fluke 810QDC Quick Disconnect Cable for the Fluke 810.
Close
Fluke 810PA Power Adapter with international plug set for the 810
Fluke 810PA Power Adapter with international plug set for the 810.
-10%
Close
Fluke 810S Triaxial Vibration Sensor for the 810
Fluke 810S Triaxial Vibration Sensor for the 810.
-10%
Close
Fluke 810SC-20 Sensor Cable for the 810
Fluke 810SC-20 Sensor Cable for the 810.
-10%
Close
Fluke 810SMM Sensor Magnetic Mount for the 810
Fluke 810SMM Sensor Magnetic Mount for the 810.
Fluke 810SMP Sensor Mounting Pads for the 810, 10-pack
Fluke 810SMP Sensor Mounting Pads for the 810, 10-pack.
Fluke 810T Non-Contact Precision Laser Tachometer for the 810
Measure the speed of motors, conveyor belts, and other moving and rotational systems with this tachometer. Additionally, this instrument is
Fluke 820-2 LED Stroboscope
Features
- 30 to 300,000 FPM (flashes per minute)
- 0.5 to 5000 Hz frequency range
- FPM or Hz frequency setting
- 0.02% accuracy
- Digital pulse width modulation
- Multi-line LCD display
- Operating temp: 32 to 113°F (0 to 45°C)
Fluke 830 Laser Alignment Tool
Features
- Intuitive guided user interface
- Intel XScale PXA270 running at 312MHz
- Ambient light protection
- 64MB RAM, 64MB flash memory
- 32 to 131°F (0 to 55°C) operating temp
- Compass measurement mode
- Dynamic machine tolerance check
- IP67 (submersible, dustproof) protection
Close
Fluke 830/BT Laser Shaft Alignment Tool with Bluetooth
Features
- Single-laser measurement technology means reduced errors from backlash, resulting in better data accuracy
- Intuitive guided user interface quickly and easily completes machine alignments
- Compass measurement mode enables flexible, reliable, and repeatable measurements using an activated electronic inclinometer
- Dynamic machine tolerance check provides continuous evaluation of alignment adjustments, so you know when your machine in acceptable range
- Unique extend mode handles gross misalignment by virtually increasing laser detector size
- Data protection ensures your data is there when you need it, with auto save and resume capability
-10%
Close
Fluke 830/MAGNET Mounting Set
Compact magnetic sensor and prism mounting bracket set.
Fluke 830/SHIMS Alignment Set
Precision alignment shim kit that corrects vertical misalignment.
-10%
Close
Fluke 835 Laser Belt Alignment Tool with reflector
Features
- Tailor-made for pulley alignment jobs because it is easy to use and only requires a single operator
- The strong magnets on the two units mount onto virtually any pulley face, making it the ideal partner for most pulley alignment jobs
- It leverages the proven OPTALIGN® reflected beam principle for maximum angular resolution to generate accurate and reliable readings
- Its time-saving method requires no cross-checking and shows offset, vertical, and horizontal angle simultaneously
- With four AAA batteries, the 835 provides 6 hours of continuous use
- Corrections are quickly made live; genuine alignment is achieved when the transmitted laser line and the corresponding reflected laser line harmonize with the respective reference line
Fluke 83V Average Responding Industrial Multimeter
- Large digit display with bright, two-level backlight
- Resistance, continuity and diode test
- Min/Max-Average recording with Min/Max Alert to capture variations automatically
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bar graph for fast changing or unstable signals
- Input alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- “Classic” design with new removable holster with built in test lead and probe storage
-10%
Close
Fluke 85RF II High-Frequency Probe, 500 Mhz
Product Features:
- Voltage Range: 0.25 to 30Vrms
- Maximum Input Voltage: 30Vrms, 200V DC
- AC to DC Ratio: 1:1
- Ratio Accuracy (At 25 MHz and loaded with 10 M ohm): Above 0.5V: +/- 0.5 dB; Below 0.5V: +/- 1.0 dB; Add +/- 0.2 dB in RF fields of 1 to 3 V/m
- Frequency Response (Relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB; 100 MHz to 200 MHz +/- 2.0 dB; 200 MHz to 500 MHz +/- 3.0 dB
Fluke 87V Industrial Multimeter
- True-rms ac voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05 % dc accuracy
- 4-1/2 digit mode for precise measurements
- Built-in thermometer lets you carry one less tool
- Large display digits and two-level bright white backlight for increased visibility
- 10,000 µF capacitance range for components and motor caps
- Peak capture to record transients as fast as 250 µs
- Measure up to 1000 V ac and dc
- Measure up to 10 A, 20 A for up to 30 seconds
- Auto and manual ranging for maximum flexibility
- Analog bargraph
- Resistance, continuity and diode test
- Frequency to 200 kHz and % duty cycle
- Min/Max and average recording to capture variations automatically
- Relative mode to remove test lead resistance from low ohms measurements
- Improved sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- Limited lifetime warranty
Fluke 87V-MAX True RMS Digital Multimeter with built-in thermometer
Product Features:
- IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments
- Tested to withstand 4 meter (13 feet) drop (with holster)
- Measure up to 1000 V, up to 10 A (20 A for 30 seconds), AC and DC
- True-RMS voltage and current for accurate measurements on non-linear signals
- 10,000 μF capacitance range, frequency to 200 kHz
- Extended AC voltage bandwidth- 15 Hz to 20 kHz
- Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built in thermometer conveniently allows users to take temperature readings without having to carry a separate instrument
- Min/Max/Average recording, plus 150 μs Peak min-max to capture variations automatically
- Resistance, continuity and diode test
- Large display digits and 2 level bright white backlight with backlit keypad buttons
- Hi resolution 20,000 count display mode
- Relative mode to remove test lead resistance from low ohms measurements
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
- Long battery life (800 hours)
- Safety rated CAT IV 600 V/CAT III 1000 V
- Battery type: Three AA batteries
Applications
- Industrial and facilities maintenance
- Cement plants and electrical utilities
- Food processing and chemical processing
- Steel mills and foundries
- Mining (MHSA approval pending)
- Military, petrochemical
-10%
Close
Fluke 87V-MAX/E2 KIT Industrial Electrician Combo Kit
What’s included with the Fluke 87V-MAX/E2 KIT
- Multimeter
- Test Leads
- Alligator Clips
- Test Probes
- Meter Hanging Kit
- Temperature Probe
- Carrying Case
- 9 V Battery (Installed) Removable holster with Test Lead Storage
- 3 x AA Batteries (Installed)
Product Features:
- IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments
- Tested to withstand 4 meter (13 feet) drop (with holster)
- Measure up to 1000 V, up to 10 A (20 A for 30 seconds), AC and DC
- True-RMS voltage and current for accurate measurements on non-linear signals
- 10,000 μF capacitance range, frequency to 200 kHz
- Extended AC voltage bandwidth- 15 Hz to 20 kHz
- Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built in thermometer conveniently allows users to take temperature readings without having to carry a separate instrument
- Min/Max/Average recording, plus 150 μs Peak min-max to capture variations automatically
- Resistance, continuity and diode test
- Large display digits and 2 level bright white backlight with backlit keypad buttons
- Hi resolution 20,000 count display mode
- Relative mode to remove test lead resistance from low ohms measurements
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
- Long battery life (800 hours)
- Safety rated CAT IV 600 V/CAT III 1000 V
- Battery type: Three AA batteries
- Kit includes soft carrying case, probes and magnetic hanging kit
Applications
- Industrial and facilities maintenance
- Cement plants and electrical utilities
- Food processing and chemical processing
- Steel mills and foundries
- Mining (MHSA approval pending)
- Military, petrochemical
-10%
Close
Fluke 87V/E2 Industrial Electrician Combo Kit
What’s included with the Fluke 87V/E2
- Multimeter
- Insulated Test Leads
- Alligator Clips
- Test Probes
- Meter Hanging Kit
- Temperature Probe
- Carrying Case
- 9 V Battery
- Lifetime Warranty
Features
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
- True-rms ac voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05% DC accuracy
- 6000 counts, 3-3/4 digits
- 4-1/2 digit mode for precise measurements (20,000 counts)
- Measure up to 1000 V AC and DC
- Measure up to 10 A, 20 A for up to 30 seconds
- Built in thermometer lets you carry one less tool (TC probe included)
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity and diode test
- 10,000 µF capacitance range for components and motor caps
- Min/max-average recording with min/max alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- Classic design with new removable holster with built in test lead and probe storage
- Unique function for accurate measurements of noisy pulse-width modulated AC voltage
- Measures correctly at the ASD and at the motor terminals
- Accurately measure the frequency (motor speed), frequency measurement not affected by the ASDs carrier frequency
- Measure AC current with an optional current clamp accessory
- Compare reading with the display on the ASD
- Special shielding blocks high frequency, high-energy noise generated by large drive systems
Fluke 87V/IMSK Industrial Multimeter Service KIT with the i400
Features
- Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
- True-RMS AC voltage and current for measuring non-linear signals
- Captures intermittents as short as 250 µS
- Safety rated CAT III 1000 V, CAT IV 600 V
- Built-in thermometer and temperature probe
- Easy access door for fast battery changes without breaking the calibration seal
- Removable holster with built in test lead and probe storage for convenience
- Audible Input Alert warning against wrong use of input jacks
- Provides peak capture and min/max/avg recording
- 6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
- Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Includes an analog bargraph for fast changing or unstable signals
- Presents a large digit display with bright, two-level backlight for easier reading in low light
- Delivers 0.05% DC accuracy
- Measures up to 1000 VAC and DC
- 10,000 µF capacitance range for components and motor caps
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch hold to capture stable readings of noisy signals
- Two-level backlit display
Applications
- Motor drives
- Plant automation
- Power distribution
- Electromechanical equipement
-10%
Close
Fluke 87VMAX-PVLEAD1 Solar Tools Kit, 1000 V, 10 A
Features
- True-rms AC voltage and current for accurate measurements on non-linear signals
- Measure up to 1000 V AC and DC
- Measure up to 10 A (20 A for 30 seconds)
- Frequency to 200 kHz
- Built in temperate function conveniently allows you to take temperature readings without having to carry a separate instrument using supplied thermocouple
- Minimum/Maximum/Average recording, plus 250 μs peak minimum to maximum to capture variations automatically
- Unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment
- Large display digits, 2-level bright white backlight and backlit keypad buttons for increased visibility
- Hi resolution 19,999 count display mode
- Long battery life (800 hours)
- IP67 rated; Fully waterproof and dust proof, to work reliably in all the places that you need to work
- Works as long as you do; provides double the battery life of the original model
- Withstands heat and cold; The meter has an extended operating temperature range of -40 (for up to 20 minutes) to 131°F [-40 (for up to 20 minutes) to 55°C]
-10%
Close
Fluke 88-5/A KIT Deluxe Automotive Multimeter Combo Kit
Features
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight
- 6000 counts, 3¾ digits
- Measure up to 1000 V AC and DC
- Measure up to 10, 20 A for up to 30 seconds
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity
- RPM measurements with inductive pickup
- Millisecond pulse width measurements for fuel injectors
- 10,000 µF capacitance range for components and motor caps
- Min/max-average recording with min/max alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without opening up the case
- “Classic” design with new removable holster with built in test lead and probe storage
- 10 mΩ input impedance wont load circuits
- 0.1% DC accuracy
Measures
- Resistance, continuity and diode test
- Millisecond pulse width measurements for fuel injectors
- Frequency to 200 kHz and % duty cycle
- Measure up to 1000 V AC and DC
- Measure current up to 10, 20 A for up to 30 seconds
- 4½ digits for precise measurements
- RPM measurements with optional inductive pickup
- Temperature measurements with optional temperature probe
Applications
- Automotive
-10%
Close
Fluke 8845A-EFPT Fine Point Extended Test Probe Adaptor Set
Fluke 8845A-EFPT Offers
- One pair (red and black)
- Snaps onto DMM probes with .080 in (2 mm) O.D. Tips
- Designed to IEC 1010 standard
- Adapter allows access to hard-to-reach test points
- Tips are insulated to the point to prevent shorting of adjacent components
-10%
Close
Fluke 8845A-TPIT Test Probe IC Tip Set
Fluke 8845A-TPIT Offers
- One pair (red and black)
- Snaps onto DMM probes with .080 in (2 mm) O.D. Tips
- Designed to IEC 1010 standard
- Pin tip jack at the adapter end is recessed for added insulation protection
- Adapter allows easy access to leads of through-hole IC’s
- Insulation at the tip fits between leads to prevent accidental shorting
