Close
Fluke LENS/25MAC2 Optional Thermal Imaging Lens, 25 µm Macro
Fluke LENS/25MAC2 Offers
Features
- Avoid the hassle of sending in your camera to calibrate with the lens – with smart lenses you can just attach the lens to any compatible camera and start taking images.
- With this lens, there’s no need to move the focus wheel the precise amount to get optimal focus. With your lens attached, use LaserSharp Auto Focus to set the focus, then position the camera and target within the working distance of the lens (~8 to ~14 mm).
- Made of 100% diamond-turned germanium with an engineered coating, the most efficient available material to transmit energy to the detector.
Applications
- R&D
- Electronics Design and Validation
- Circuit Boards
- Components
- Faulty Equipment Location
Close
Fluke LENS/4XTELE2 Optional Thermal Imaging Lens, 4x Telephoto
Optional 4X Telephoto Lens for the TI200/300/400 Thermal Imaging Cameras.
Close
Fluke LVD2 Volt Light, Non Contact Voltage Detector & LED flashlight
Features
- Dual sensitivity
- LED light with 100,000 hour life
- Dual levels of detection
- Blue indicates proximity to AC voltage source
- Red indicates you’re at the source
- Ultra-bright white LED
- 100,000 hr bulb
Close
Fluke MDA-510 Motor Drive Analyzer, 4 Channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, and unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, current, DC Bus voltage level and AC ripple, voltage and current unbalance, and voltage modulation
- Conduct guided measurements for motor-drive input, DC bus, and drive output with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Applications
- Industrial automation
- HVAC/R
- Motor repair
- Discrete or process based industrial manufacturing
- Waste water treatment
- Oil and gas maintenance
What’s included with the Fluke M
Close
Fluke MDA-550 Motor Drive Analyzer with Motor Shaft and Harmonics, 4 Channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, cur- rent, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics, voltage modulation, and motor shaft voltage discharges
- Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system
- Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Close
Fluke MDA-550-III Motor Drive Analyzer, 4 channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, cur- rent, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics, voltage modulation, and motor shaft voltage discharges
- Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system
- Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Close
Fluke MP1-MAGNET PROBE 1 Magnetic Probes for 4MM Banana, 4 Pack
Magnetic probe tips for voltage test leads with 4 mm banana connector. What’s included with the Fluke MP1-MAGNET PROBE 1
Close
Fluke Networks SMC-9-SCLC-M – Single-mode 9 µm Launch Cord, SC/Metal LC Connector
SINGLEMODE LAUNCH CABLE 160M (SC/LC), METAL
- Cable diameter and length: 9 µm; 160 meter
- End type: SC
- End type 2: LC with metal latch design
- Cable Type: Single-mode; Launch cord
- For use with: OptiFiber Pro
- Single-mode 9 µm launch cord
- Supports SmartLoop
- Robust metal LC connector; Compact case protects connectors
- Reference grade connectors for precise measurements
- OTDR Measurements
Close
Fluke Networks SMC-9-SCLCAPC-M – Single-mode 9 µm Launch Cord, SC/Metal LCAPC Connector
SINGLEMODE LAUNCH CABLE 160M (SC/LCAPC), METAL
- Cable diameter and length: 9 µm; 160 meter
- End type: SC
- End type 2: LCAPC with metal latch design
- Cable Type: Single-mode; Launch cord
- For use with: OptiFiber Pro
- Robust Metal LC Connector
- Reference grade connectors for precise measurements
- OTDR measurements
- Compact case protects connectors
- Supports OptiFiber Pro
Close
Fluke Networks SMC-9-SCSC Singlemode Launch Cable 9 µm SC/SC
Fluke Networks SMC-9-SCSC Singlemode Launch Cable 9 um SC/SC, 160 meters long
- Singlemode launch cable 9 µm SC/SC
- 160 meters long
Close
Fluke Norma 6003 Portable Power Analyzer, 3-channel
Features
- Key measurements: Voltage, current, active power, reactive power, apparent power, power factor, and harmonics with associated values
- High accuracy and wide bandwidth – 0.1% measurement accuracy and 500 kHz bandwidth
- Highly portable and easily installed in tight spaces – only 3.78″ (9.6 cm) thick
- Operate continuously for up to 10 hours without an external power supply using the 5000 mAh Li-ion internal battery
- Measure safely – safety rated for CAT III 1000V, CAT IV 600 V environments
- Measure three phase power and DC output power at the same time with three channels, with voltage and current inputs on each channel
- 0.1% accuracy, 500 kHz bandwidth, 200 ks/s sample rate so you can rely on the power conversion system measurements you take no matter what distortion may be present
- USB and RS485 interface and open communication protocol for easy system integration and software platform flexibility
- Combine two analyzers to enable simultaneous measurement of multiple circuits for even more troubleshooting capability – configurable to 6 or 8 channels using dual analyzer synchronization
- View critical data in the field on the main display – Meter, Waveform, Harmonics up to the 100th, Vector and Trend
- Ensure high common-mode rejection and allow flexible configurations according to measurement requirements using the electrically isolated channels
- User adjustable measurement rate from 100 ms to 1 s with continuous logging via 32GB of onboard storage
- Easy in-field set up using the integrated front panel or a remote PC connection (USB or RS485)
- Online measuring, data download and analysis with included PC software (Fluke Power Analyzer Software)
- Full remote control of the connected instrument using Fluke Power Analyzer Software and a local USB or long-distance RS485 connection
Applications
- R&D and third party labs
- Renewable energy/clean tech
- Manufacturing
Close
Fluke Norma 6003+ Portable Power Analyzer with speed and torque, 3-channel
Features
- Key measurements: Voltage, current, active power, reactive power, apparent power, power factor, and harmonics with associated values
- High accuracy and wide bandwidth – 0.1% measurement accuracy and 500 kHz bandwidth
- Highly portable and easily installed in tight spaces – only 3.78″ (9.6 cm) thick
- Operate continuously for up to 10 hours without an external power supply using the 5000 mAh Li-ion internal battery
- Measure safely – safety rated for CAT III 1000V, CAT IV 600 V environments
- Measure three phase power and DC output power at the same time with three channels, with voltage and current inputs on each channel
- Make mechanical torque and speed measurements using the included inputs and outputs
- 0.1% accuracy, 500 kHz bandwidth, 200 ks/s sample rate so you can rely on the power conversion system measurements you take no matter what distortion may be present
- USB and RS485 interface and open communication protocol for easy system integration and software platform flexibility
- Combine two analyzers to enable simultaneous measurement of multiple circuits for even more troubleshooting capability – configurable to 6 or 8 channels using dual analyzer synchronization
- View critical data in the field on the main display – Meter, Waveform, Harmonics up to the 100th, Vector and Trend
- Ensure high common-mode rejection and allow flexible configurations according to measurement requirements using the electrically isolated channels
- User adjustable measurement rate from 100 ms to 1 s with continuous logging via 32GB of onboard storage
- Easy in-field set up using the integrated front panel or a remote PC connection (USB or RS485)
- Online measuring, data download and analysis with included PC software (Fluke Power Analyzer Software)
- Full remote control of the connected instrument using Fluke Power Analyzer Software and a local USB or long-distance RS485 connection
Applications
- R&D and third party labs
- Renewable energy/clean tech
- Manufacturing
