Close
Fluke LENS/4XTELE2 Optional Thermal Imaging Lens, 4x Telephoto
Optional 4X Telephoto Lens for the TI200/300/400 Thermal Imaging Cameras.
Close
Fluke LVD2 Volt Light, Non Contact Voltage Detector & LED flashlight
Features
- Dual sensitivity
- LED light with 100,000 hour life
- Dual levels of detection
- Blue indicates proximity to AC voltage source
- Red indicates you’re at the source
- Ultra-bright white LED
- 100,000 hr bulb
Close
Fluke MDA-510 Motor Drive Analyzer, 4 Channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, and unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, current, DC Bus voltage level and AC ripple, voltage and current unbalance, and voltage modulation
- Conduct guided measurements for motor-drive input, DC bus, and drive output with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Applications
- Industrial automation
- HVAC/R
- Motor repair
- Discrete or process based industrial manufacturing
- Waste water treatment
- Oil and gas maintenance
What’s included with the Fluke M
Close
Fluke MDA-550 Motor Drive Analyzer with Motor Shaft and Harmonics, 4 Channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, cur- rent, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics, voltage modulation, and motor shaft voltage discharges
- Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system
- Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Close
Fluke MDA-550-III Motor Drive Analyzer, 4 channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, cur- rent, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics, voltage modulation, and motor shaft voltage discharges
- Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system
- Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Close
Fluke MP1-MAGNET PROBE 1 Magnetic Probes for 4MM Banana, 4 Pack
Magnetic probe tips for voltage test leads with 4 mm banana connector. What’s included with the Fluke MP1-MAGNET PROBE 1
Close
Fluke Networks SMC-9-SCLC-M – Single-mode 9 µm Launch Cord, SC/Metal LC Connector
SINGLEMODE LAUNCH CABLE 160M (SC/LC), METAL
- Cable diameter and length: 9 µm; 160 meter
- End type: SC
- End type 2: LC with metal latch design
- Cable Type: Single-mode; Launch cord
- For use with: OptiFiber Pro
- Single-mode 9 µm launch cord
- Supports SmartLoop
- Robust metal LC connector; Compact case protects connectors
- Reference grade connectors for precise measurements
- OTDR Measurements
Close
Fluke Networks SMC-9-SCLCAPC-M – Single-mode 9 µm Launch Cord, SC/Metal LCAPC Connector
SINGLEMODE LAUNCH CABLE 160M (SC/LCAPC), METAL
- Cable diameter and length: 9 µm; 160 meter
- End type: SC
- End type 2: LCAPC with metal latch design
- Cable Type: Single-mode; Launch cord
- For use with: OptiFiber Pro
- Robust Metal LC Connector
- Reference grade connectors for precise measurements
- OTDR measurements
- Compact case protects connectors
- Supports OptiFiber Pro
Close
Fluke Networks SMC-9-SCSC Singlemode Launch Cable 9 µm SC/SC
Fluke Networks SMC-9-SCSC Singlemode Launch Cable 9 um SC/SC, 160 meters long
- Singlemode launch cable 9 µm SC/SC
- 160 meters long
Close
Fluke Norma 6003 Portable Power Analyzer, 3-channel
Features
- Key measurements: Voltage, current, active power, reactive power, apparent power, power factor, and harmonics with associated values
- High accuracy and wide bandwidth – 0.1% measurement accuracy and 500 kHz bandwidth
- Highly portable and easily installed in tight spaces – only 3.78″ (9.6 cm) thick
- Operate continuously for up to 10 hours without an external power supply using the 5000 mAh Li-ion internal battery
- Measure safely – safety rated for CAT III 1000V, CAT IV 600 V environments
- Measure three phase power and DC output power at the same time with three channels, with voltage and current inputs on each channel
- 0.1% accuracy, 500 kHz bandwidth, 200 ks/s sample rate so you can rely on the power conversion system measurements you take no matter what distortion may be present
- USB and RS485 interface and open communication protocol for easy system integration and software platform flexibility
- Combine two analyzers to enable simultaneous measurement of multiple circuits for even more troubleshooting capability – configurable to 6 or 8 channels using dual analyzer synchronization
- View critical data in the field on the main display – Meter, Waveform, Harmonics up to the 100th, Vector and Trend
- Ensure high common-mode rejection and allow flexible configurations according to measurement requirements using the electrically isolated channels
- User adjustable measurement rate from 100 ms to 1 s with continuous logging via 32GB of onboard storage
- Easy in-field set up using the integrated front panel or a remote PC connection (USB or RS485)
- Online measuring, data download and analysis with included PC software (Fluke Power Analyzer Software)
- Full remote control of the connected instrument using Fluke Power Analyzer Software and a local USB or long-distance RS485 connection
Applications
- R&D and third party labs
- Renewable energy/clean tech
- Manufacturing
Close
Fluke Norma 6003+ Portable Power Analyzer with speed and torque, 3-channel
Features
- Key measurements: Voltage, current, active power, reactive power, apparent power, power factor, and harmonics with associated values
- High accuracy and wide bandwidth – 0.1% measurement accuracy and 500 kHz bandwidth
- Highly portable and easily installed in tight spaces – only 3.78″ (9.6 cm) thick
- Operate continuously for up to 10 hours without an external power supply using the 5000 mAh Li-ion internal battery
- Measure safely – safety rated for CAT III 1000V, CAT IV 600 V environments
- Measure three phase power and DC output power at the same time with three channels, with voltage and current inputs on each channel
- Make mechanical torque and speed measurements using the included inputs and outputs
- 0.1% accuracy, 500 kHz bandwidth, 200 ks/s sample rate so you can rely on the power conversion system measurements you take no matter what distortion may be present
- USB and RS485 interface and open communication protocol for easy system integration and software platform flexibility
- Combine two analyzers to enable simultaneous measurement of multiple circuits for even more troubleshooting capability – configurable to 6 or 8 channels using dual analyzer synchronization
- View critical data in the field on the main display – Meter, Waveform, Harmonics up to the 100th, Vector and Trend
- Ensure high common-mode rejection and allow flexible configurations according to measurement requirements using the electrically isolated channels
- User adjustable measurement rate from 100 ms to 1 s with continuous logging via 32GB of onboard storage
- Easy in-field set up using the integrated front panel or a remote PC connection (USB or RS485)
- Online measuring, data download and analysis with included PC software (Fluke Power Analyzer Software)
- Full remote control of the connected instrument using Fluke Power Analyzer Software and a local USB or long-distance RS485 connection
Applications
- R&D and third party labs
- Renewable energy/clean tech
- Manufacturing
Close
Fluke Norma 6004 Portable Power Analyzer, 4-channel
Features
- Key measurements: Voltage, current, active power, reactive power, apparent power, power factor, and harmonics with associated values
- High accuracy and wide bandwidth – 0.1% measurement accuracy and 500 kHz bandwidth
- Highly portable and easily installed in tight spaces – only 3.78″ (9.6 cm) thick
- Operate continuously for up to 10 hours without an external power supply using the 5000 mAh Li-ion internal battery
- Measure safely – safety rated for CAT III 1000V, CAT IV 600 V environments
- Measure three phase power and DC output power at the same time with four channels, with voltage and current inputs on each channel
- 0.1% accuracy, 500 kHz bandwidth, 200 ks/s sample rate so you can rely on the power conversion system measurements you take no matter what distortion may be present
- USB and RS485 interface and open communication protocol for easy system integration and software platform flexibility
- Combine two analyzers to enable simultaneous measurement of multiple circuits for even more troubleshooting capability – configurable to 6 or 8 channels using dual analyzer synchronization
- View critical data in the field on the main display – Meter, Waveform, Harmonics up to the 100th, Vector and Trend
- Ensure high common-mode rejection and allow flexible configurations according to measurement requirements using the electrically isolated channels
- User adjustable measurement rate from 100 ms to 1 s with continuous logging via 32GB of onboard storage
- Easy in-field set up using the integrated front panel or a remote PC connection (USB or RS485)
- Online measuring, data download and analysis with included PC software (Fluke Power Analyzer Software)
- Full remote control of the connected instrument using Fluke Power Analyzer Software and a local USB or long-distance RS485 connection
Applications
- R&D and third party labs
- Renewable energy/clean tech
- Manufacturing
